Abstract
In this paper, an analytical procedure for characterizing the dielectric loaded quasi-lumped element resonator (QLER) antenna for wireless applications is presented. The procedure is to examine the equivalent circuit model for the dielectric loaded QLER antenna and its feed structure, based on transmission line theory and equivalent lumped-element circuits. The corresponding lumped-circuit parameters of the equivalent circuit are extracted using analytical formulae taken from the literature and validated by comparison with numerical simulations such as a full-wave finite-element computer code and with experiments. The devised equivalent circuit explains its behavior as either a wide bandwidth or dual-band antenna, depending on the spacing between the dielectric resonator (DR) and the coaxial feed probe location.
Similar content being viewed by others
References
Caratelli D, Cicchetti R, Bit-Babik G, Faraone A (2006) Circuit model and near-field behavior of a novel patch antenna for WWLAN applications. Microw Opt Technol Lett 1(49):97–100
Ain MF, Olokede SS, Qasaymeh YM, Marzuki A, Mohammed JJ, Sreekantan S, Hutagalung SD, Ahmad ZA, Abdulla MZ (2013) A novel 5.8 GHz quasi-lumped element resonator antenna. AEU - Int J Electron Commun 7(67):557–563
Alley G (1970) Interdigital capacitors and their application to lumped-element microwave-integrated circuits. IEEE Trans Microw Theory Tech 18:1028–1033
Gevorgian S, Martinsson T, Linner P, Kolberg E (1996) CAD models for multilayered substrate interdigital capacitors. IEEE Trans Microw Theory Tech 44:896–904
Sadhir V, Bahl I, Willems D (1994) CAD-compatible accurate models of microwave passive elements for MMIC applications. Int J Microw Millimeter Wave CAE 4:148–162
Hobdell J (1979) Optimization of interdigital capacitors. IEEE Trans Microw Theory Tech 27:788–791
Chi C, Rebeiz G (1995) Planar microwave and millimeter-wave lumped elements and coupled-line filters using micro-machining techniques. IEEE Trans Microw Theory Tech 43:730–738
Pettenpaul E, Kapusta H, Weisgerber A, Mampe H, Luginsland J, Wolff I (1988) CAD models of lumped elements on GaAs up to 18 GHz. IEEE Trans Microw Theory Tech 36:294–304
Zhu L, Wu K (2000) Accurate circuit model of an interdigital capacitor and its application to the design of new quasi-lumped miniaturized filters with suppression of harmonic resonance. IEEE Trans Microw Theory Tech 48:347–356
Kulke R, Pogatzki P, Kother D, Sporkmann T, and Wolff I (1994) Enhancement of coplanar capacitor models and verification up to 67 GHz for (M)MIC circuit design, Proc 24th European Microwave Conf, Cannes, pp. 258 –262
Naghed M, Wolff I (1990) Equivalent capacitances of CPW discontinuities and interdigitated capacitors using a three-dimensional finite-difference method. IEEE Trans Microw Theory Tech 38:1808–1815
Dib N, Ababneh J, Omar A (2005) “CAD Modeling of Coplanar Waveguide Interdigital Capacitor”, Int. J RF Microw Comput Aided Eng 6(15):551–559
Bahl IJ (2003) Lumped Elements for RF and Microwave Circuits. Artech House, Boston
Mamishev AV, Sundara-Rajan K, Fumin Y, Yanqing D, Zahn M (2004) Interdigital sensors and transducers. Proc IEEE 5(92):808–845
Best SR (2005) Low Q electrically small linear and elliptical polarized spherical dipole antennas. IEEE Trans Antennas Propag 3(18):1047–1053
Collin RE (1992) Foundations for microwave engineering [Hauptw.], 2nd edn. MacGraw-Hill, New York
Neshati M. Wu HZ (2001) The determination of the resonance frequency of the TE111 y mode in a rectangular dielectric resonator for antenna application, Antennas and Propagation, Eleventh International Conference on (IEE Conf. Publ. No. 480), (1), 53–56
Olokede SS, Adamariko CA, Qasaymeh YM (2015) Equivalent circuit model of a coaxial excited microstrip-fed quasi-lumped element resonator antenna array. IET Microw Antennas Propag 9(5):446–453
Ain MF, Qasaymeh YMA, Ahmad ZA, Zakariya MA, Othman MA, Sulaiman AA, Othman A, Hutagalung SD, Abdullah MZ (2010) A novel 5.8 GHz high gain array dielectric resonator antenna. Prog Electromagn Res C 15:201–210
Kajfez D, Guillon P (1986) Dielectric resonators. Artech House, Dedham
Kishk AA, Xiao Z, Glisson AW, Kajfez D (2003) Numerical analysis of stacked dielectric resonator antennas excited by a coaxial probe for wideband applications. IEEE Trans Antennas Prop 8(51):1996–2006
Zhang Y, Fan J, Selli G, Cocchini M, Paulis FD (2008) Analytical evaluation of via-plate capacitance for multilayer printed circuit boards and packages. IEEE Trans on Microw Theory Tech 9(56):2118–2128
Zhang YJ, Feng G, Fan J (2010) A novel impedance definition of a parallel plate pair for an intrinsic via circuit model. IEEE Trans on Microw Theory Tech 12(58):3780–3789
Hu Y, Zhang YJ, Fan J (2012) Equivalent circuit model of coaxial probes for patch antennas. Prog Electromagn Res B 38:281–296
Zhang YJ, Fan J (2010) An intrinsic circuit model for multiple vias in an irregular plate pair through rigorous electromagnetic analysis. IEEE Trans on Microw Theory Tech 8(58):2251–2265
Gong J, Volakis JL (1995) An efficient and accurate model of the coaxial cable feeding structure for FEM simulation. IEEE Trans Antennas Propag 12(43):1474–1478
Davidovitz M, Lo YT (1986) Input impedance of a probe-fed circular microstrip antenna with thick substrate. IEEE Trans Antennas Propag 7(34):905–911
Acknowledgments
The authors would like to acknowledge Universiti Sains Malaysia for research grant numbers 1001/PELECT/854004 RUT.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Olokede, S.S., Ain, M.F. & Ahmad, Z.A. Dielectric loaded quasi-lumped element resonator antenna circuit model for U-NII/ISM band wireless applications. Ann. Telecommun. 71, 527–537 (2016). https://doi.org/10.1007/s12243-016-0526-7
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12243-016-0526-7