Published online by Cambridge University Press: 02 August 2013
This paper proposes a localization scheme using ultrasonic beacons in an unstructured multi-block workspace. Indoor localization schemes using ultrasonic sensors have widely been studied due to their low costs and high accuracies. However, ultrasonic sensors are susceptible to environmental noise due to the propagation characteristics of ultrasonic waves. In addition, the decay of ultrasonic signals over long distances implies that ultrasonic sensors are unsuitable for use in large indoor environments. To overcome these shortcomings of ultrasonic sensors, while retaining their advantages, a multi-block approach was devised by dividing an indoor space into several blocks with multiple beacons in each block. However, it is difficult to divide an indoor space into several blocks when beacons cannot be installed in a regular manner or when some new beacons are installed. To resolve this difficulty, a dynamic algorithm is needed to divide an indoor space into multiple blocks and to select suitable beacons. Therefore, this paper proposes a real-time localization scheme to estimate the position of a mobile robot independent of beacon locations and to estimate the position of a new beacon installed at an unknown position. A beacon selection algorithm was developed to select optimal beacons according to robot position and to set up sets of beacons for mobile robot navigation. By using the new beacon searching and calibration algorithm, a mobile robot is able to navigate in an unknown space without requiring the additional setup time needed to install new beacons. The performance of the proposed localization system was verified using real experiments.
To send this article to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about sending to your Kindle. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save this article to your Dropbox account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Dropbox account. Find out more about saving content to Dropbox.
To save this article to your Google Drive account, please select one or more formats and confirm that you agree to abide by our usage policies. If this is the first time you used this feature, you will be asked to authorise Cambridge Core to connect with your Google Drive account. Find out more about saving content to Google Drive.