Abstract
This paper describes the initial development of a computer based Rapid Prototyping Design Advice System. The system is intended to assist the designer or project manager, particularly those in small and medium sized companies, in planning the prototyping stage of product development. It provides the user with an efficient and user friendly development aid which uses information obtained from the user and Computer Aided Design data to recommend suitable rapid prototyping solutions.
Similar content being viewed by others
References
Rahmati, S. and Dickens, P. M. (1995) Stereolithography Process Improvement First National Conference on Rapid Prototyping and Tooling Research, G. Bennett, Ed.
Hague, R. and Dickens, P. M. (1995) In Stresses caused in ceramic shells using QuickCast models, University of Nottingham, First National Conference on Rapid Prototyping and Tooling Research. G. Bennett, Ed.
Iuliano, L., Gatto, A. and De Filippi, A. (1995) Metallization and Rapid Tooling, Politicnico Di Torino, Italy, Proceedings of The Fourth European Conference on Rapid Prototyping and Manufacturing, Dr. P. M. Dickens, Ed.
Norman, R. D. and Dickens, P. M. (1995) 3D welding Fabrication: Strategies for sloped surfaces, Nottingham University, First National Conference on Rapid Prototyping and Tooling Research. G. Bennett, Ed.
Spencer, J. D. and Dickens, P. M. (1995) Production of Metal Parts featuring heavy sections using 3D welding. Nottingham University, First National Conference on Rapid Prototyping and Tooling Research. G. Bennett, Ed.
Bart Swaelens, Materialise N. V., Belgium and Kruth, J. P. (1993) Medical Applications of Rapid Prototyping Techniques, Katholieke Universiteit Leuven, Div. PMA, Belgium.
Duffy, J. M., Winder, R. J., Gilmore, G. J. and Orr, J. F. Custom Hip Implant Manufacture from Digital MRI scan data, The Queens University of Belfast, Department of Mechanical Engineering / Northern Ireland Medical Physics Agency / The Queens University of Belfast, Northern Ireland Technology Centre.
Chris Driver. (1996) Flow Testing Using CNC and Rapid Prototyping Blocks: An Automotive Case Study, Rover Group Ltd, Coventry, UK. Rapid News, 4(2), 40–42.
Calvert G. C., Driver, C. M. E., Rover Power Train, and McDonald, J. A. (1995) Rapid Experimental Analysis of Flow, University of Warwick, First National Conference on Rapid Prototyping and Tooling Research. G. Bennett, Ed.
Reeves, P. E. and Cobb, R. C. (1995) Improvements in the surface finish of stereolithography models for manufacturing applications, Nottingham University, First National Conference on Rapid Prototyping and Tooling Research. G. Bennett, Ed.
Müller, H., Bauer, J. and Klingenberg, H. H. (1996) Computer Based Rapid Prototyping System Selection and Support. Proceedings of Time Compression Technologies Conference,' 96, The Heritage Motor Centre, Gaydon, UK. pp. 241–250.
Campbell, R. I., Bernie, M. R. N. (1996) Creating a Database of Rapid Prototyping System Capabilities. Journal of Materials Processing Technology 61, 163–167.
Swift, K. G. (1987) Knowledge Based Design for Manufacture, p. 38.
Begg, V. (1984) Developing Expert CAD Systems, pp. 38–40.
Ringland, G. A. and Duce, D. A. (1988) Approaches to Knowledge Representation-An Introduction, Ed, p. 103.
Swift, K. G. (1987) Knowledge Based Design for Manufacture, p. 38.
STL File format courtesy of 3D Systems Inc., Valencia, California, USA.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Bibb, R., Taha, Z., Brown, R. et al. Development of a rapid prototyping design advice system. Journal of Intelligent Manufacturing 10, 331–339 (1999). https://doi.org/10.1023/A:1008920512663
Issue Date:
DOI: https://doi.org/10.1023/A:1008920512663