Abstract
This paper describes a novel method that can be used to reduce test cycle count in a parallel access scan based Built-In-Self-Test (BIST) environment. An algorithm that allows the efficient application of deterministically generated patterns is proposed. This approach allows BIST fault coverage to be increased using deterministic vectors, while minimizing the cost, in terms of test cycles, of applying the vectors.
Similar content being viewed by others
References
Z. Barzilai, D. Coppersmith, and A.L. Rosenberg, “Exhaustive Generation of Bit Patterns with Applications to VLSI Self-Testing,” IEEE Trans. on Comp., Vol. C-32, No. 2, pp. 190-194, Feb. 1983.
D.T. Tang and C.L. Chen, “Logic Test Pattern Generation Using Linear Codes,” IEEE Trans. on Comp., Vol. C-33, No. 9, pp. 845-850, Sept. 1984.
E.J. McCluskey and S. Bozorgui-Nesbat, “Design for Autonomous Test,” IEEE Trans. on Circuits and Systems, Vol. Cas-28, No. 11, pp. 1070-1078, Nov. 1981.
H.-J. Wunderlich and S. Hellebrand, “The Pseudo-Exhaustive Test of Sequential Circuits,” IEEE Trans. on CAD of Integrated Circuit and Systems, Jan. 1992.
F. Berglez, C. Gloster, and G. Kedem, “Hardware-Based Weighted Random Pattern Generation for Boundary Scan,” IEEE ITC, pp. 264-274, 1989.
C.L. Chen, “Linear Dependencies in Linear Feedback Shift Registers,” IEEE Trans. on Comp., Vol. C-35, No. 12, pp. 1086-1088, Dec. 1986.
B. Koenemann, “LFSR-Coded Test Patterns for Scan Designs,” ETC, pp. 237-242, 1991.
S. Hellebrand, S. Tarnick, J. Rajski, and B. Courtois, “Generation of Vector Patterns Through Reseeding of Multiple-Polynomial Linear FeedBack Shift Registers,” Proc. IEEE Int. Test Conf., 1992, pp. 120-263.
S.B. Akers and W. Jansz, “Test Set Embedding in a Build-in Self-Test Environment,” IEEE ITC, pp. 257-263, 1989.
C. Dufaza and G. Cambon, “LFSR Based Deterministic and Pseudo-Random Test Pattern Generator Structures,” Proc. European Test Conference, Munich, 1991, pp. 27-34.
B. Konemann, T. Mucha, and G. Zwichoff, “Built-In Logic Block Observation Techniques,” IEEE ITC, pp. 37-41, 1979.
H. Hao and R.Avra, “Structured Design-For-Debug-the Super-Sparc II Methodology and Implementation,” IEEE ITC, pp. 175-183, 1995.
S. Bhatia, T. Gheewala, and P.Varma, “AUnifying Methodology for Intellectual Property and Custom Logic Design,” IEEE ITC, pp. 639-648, 1996.
T. Gheewala, H.R. Sucar, and P. Varma, “A Global BIST Methodology,” IEEE ATS, pp. 154-159, 1993.
S. Chandra, Tom Ferry, Tushar Gheewala, and Kerry Pierce, “ATPG Based on a Novel Grid Addressable Latch Element,” ACM/IEEE DAC, pp. 282-286, 1991.
S.M. Lorusso, P.N. Bompastore, and M.T. Fertsch, “Integrating CrossCheck Technology into the Raytheon Test Environment,” IEEE ITC, pp. 520-529, 1991.
P. Varma, “Sequential Test Generation in Massive Observability Environments,” IEEE ATS, pp. 119-124, 1994.
Rights and permissions
About this article
Cite this article
Ayari, B., Varma, P. Test Cycle Count Reduction in a Parallel Scan BIST Environment. Journal of Electronic Testing 16, 409–418 (2000). https://doi.org/10.1023/A:1008304329142
Issue Date:
DOI: https://doi.org/10.1023/A:1008304329142