Skip to main content
Log in

Quelling Cabin Noise in Turboprop Aircraft via Active Control

  • Published:
Journal of Combinatorial Optimization Aims and scope Submit manuscript

Abstract

Cabin noise in turboprop aircraft causes passenger discomfort, airframe fatigue, and employee scheduling constraints due to OSHA standards for exposure to high levels of noise. The noise levels in the cabins of turboprop aircraft are typically 10 to 30 decibels louder than commercial jet noise levels. However, unlike jet noise the turboprop noise spectrum is dominated by a few low frequency tones. Active structural acoustic control is a method in which the control inputs (used to reduce interior noise) are applied directly to a vibrating structural acoustic system. The control concept modeled in this work is the application of in-plane force inputs to piezoceramic patches bonded to the wall of a vibrating cylinder. The goal is to determine the force inputs and locations for the piezoceramic actuators so that (1) the interior noise is effectively damped; (2) the level of vibration of the cylinder shell is not increased; and (3) the power requirements needed to drive the actuators are not excessive. Computational experiments for data taken from a computer generated model and from a laboratory test article at NASA Langley Research Center are provided.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • —, “Noise and vibration control: Three technologies are combined to provide significant reduction of aircraft cabin noise and vibration levels,” Aerospace Engineering, vol. 14, no.9, pp. 10–12, 1994.

  • R. Battiti and G. Tecchiolli, “The reactive tabu search,” ORSA Journal on Computing, vol.6, pp. 126–140, 1994.

    Google Scholar 

  • R.H. Cabell and H.C. Lester, “Investigation of Force Distributions for Interior Noise Control Using a Neural Network,” Proceedings of the Second Conference on Recent Advances in Active Control of Sound and Vibration, Blacksburg, VA, April 1993, pp. 55–69.

  • R.H. Cabell, H.C. Lester, G.P. Mathur, and B.N. Tran, “Optimization of Actuator Arrays for Aircraft Interior Noise Control,” Proceedings of the 15th AIAA Aero-Acoustics Conference, Long Beach, CA, AIAA-93–4447, 1993.

  • R. DeMeis, “Quieting cabin noise,” Aerospace America, pp. 20–21, Feb. 1995.

  • S.P. Engelstad, K.A. Cunefare, S. Crane, and E.A. Powell, “Optimization strategies for minimum interior noise and weight using FEM/BEM,” Internoise, vol. 2, pp. 1205–1208, 1995.

    Google Scholar 

  • C.R. Fuller and A.H. von Flotow, “Active control of sound and vibration,” IEEE Control Systems, pp. 9–19, Dec. 1995.

  • F. Glover, “Tabu search, Part I,” ORSA J. on Computing, vol. 1, pp. 190–206, 1989.

    Google Scholar 

  • F. Glover, “Tabu search: A tutorial,” Interfaces, vol. 20, pp. 74–94, 1990.

    Google Scholar 

  • G. Golub and C. VanLoan, Matrix Computations, Johns Hopkins University Press: Baltimore, MD, 1989.

    Google Scholar 

  • R.K. Kincaid, “Actuator Placement for Active Sound and Vibration Control of Cylinders,” NASAASEE Contractor Report 198210, 1995, p. 85.

  • R.K. Kincaid and R.T. Berger, “The damper placement problem on space truss structures,” Location Science, vol. 1, pp. 219–234, 1993.

    Google Scholar 

  • R.K. Kincaid and K.E. Laba, “Reactive Tabu Search and Sensor Selection in Active Structural Acoustic Control Problems,” Working Paper, Department of Mathematics, College of William and Mary, 1997.

  • K.E. Laba, “The Application of a Tabu Search on the Problem of Active Structural Acoustic Control,” Undergraduate Honors Thesis, Department of Mathematics, The College of William and Mary, 1996.

  • H.C. Lester and R.J. Silcox, “Active Control of Interior Noise in a Large Scale Cylinder Using Piezoelectric Actuators,” Proceedings of International Specialists Meeting: Rotorcraft Acoustics and Rotor Fluid Dynamics, Philadelphia, PA, Oct. 1991.

  • P. Leug, “Process of Silencing Sound Oscillations,” U.S. Patent No. 2,043,416, 1936.

  • K.H. Lyle and R.J. Silcox, “A Study of Active Trim Panels for Noise Reduction in an Aircraft Fuselage,” Paper no. 951179 in SAE General, Corporate and Regional Aviation Meeting and Exposition, May 1995.

  • S.L. Padula and R.K. Kincaid, “Aerospace Applications of Integer and Combinatorial Optimization,” NASA Technical Memorandum 110210, 1995.

  • R.J. Silcox, C.R. Fuller, and H.C. Lester, “Mechanisms of active control in cylindrical fuselage structures,” AIAA Journal, vol. 28, pp. 1397–1404, Aug. 1990.

    Google Scholar 

  • R.J. Silcox, S. Lefebvre, V.L. Metcalf, T.B. Beyer, and C.R. Fuller, “Evaluation of Piezoelectric Actuators for Control of Aircraft Interior Noise,” AIAA paper no. 92–02–091, Presented at DGLR/AIAA 14th Aeroacoustics Conference, Aachen, Germany, May 11–14, 1992.

Download references

Author information

Authors and Affiliations

Authors

Rights and permissions

Reprints and permissions

About this article

Cite this article

Kincaid, R.K., Laba, K.E. & Padula, S.L. Quelling Cabin Noise in Turboprop Aircraft via Active Control. Journal of Combinatorial Optimization 1, 229–250 (1997). https://doi.org/10.1023/A:1009724325820

Download citation

  • Issue Date:

  • DOI: https://doi.org/10.1023/A:1009724325820

Navigation