A standardized method for accuracy study of MRI-compatible robots: case study: a body-mounted robot

E. Siampli; R. Monfaredi; S. Pieper; Pan Li; V. Beskin; K. Cleary

doi:10.1117/12.2550575

16 March 2020 A standardized method for accuracy study of MRI-compatible robots: case study: a body-mounted robot

E. Siampli, R. Monfaredi, S. Pieper, Pan Li, V. Beskin, K. Cleary

Proceedings Volume 11315, Medical Imaging 2020: Image-Guided Procedures, Robotic Interventions, and Modeling; 113152T (2020) https://doi.org/10.1117/12.2550575
Event: SPIE Medical Imaging, 2020, Houston, Texas, United States

Abstract

Here we report on a phantom targeting study for accuracy evaluation of our body-mounted robot for Magnetic Resonance Imaging (MRI) guided arthrography. We use a standardized method developed in a multi-institute effort with the aim of providing an objective method for accuracy and signal-to-noise Ratio (SNR) evaluation of MRI-compatible robots. The medical definition of arthrography is the radiographic visualization of a joint (as the hip or shoulder) after the injection of a radiopaque substance. That procedure provides an evaluation of the joints using two medical imaging modalities, fluoroscopic x-ray imaging and MRI. Conventional arthrography is done in two stages: first the contrast dye injected into the joint (fluoroscopic procedure) and then an MRI to evaluate the joint space. Our MRI-guided compatible robot is intended to enable needle placement in the MRI environment, streamlining the procedure. The targeting study was conducted using the quality assessment mockup phantom and associated software called QARAI that was developed by the URobotics Laboratory at Johns Hopkins and colleagues. The mockup contains four embedded fiducials and an 8 by 8 grid which is used to automatically identify the targeting points with high accuracy. The study was conducted on a Philips Achieva 1.5T MRI system and 10 points were targeted. All targets were reached with an average error of 2.71mm. The targeting algorithm, as well as the control of the robot, were completed using robot control modules developed with the open source software 3D Slicer.

Citation Download Citation

E. Siampli, R. Monfaredi, S. Pieper, Pan Li, V. Beskin, and K. Cleary "A standardized method for accuracy study of MRI-compatible robots: case study: a body-mounted robot", Proc. SPIE 11315, Medical Imaging 2020: Image-Guided Procedures, Robotic Interventions, and Modeling, 113152T (16 March 2020); https://doi.org/10.1117/12.2550575

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available