Abstract
We first present a new multi-modular shunt active power filter system suitable for large-capacity compensation. Each module in the system has the same circuit topology, system functionality, and controller design, to achieve coordination control among the modules. The module’s reference signals are obtained by multiplying the total reference signal by the respective distribution coefficient. Next, a novel fault-tolerant approach is proposed based on split-phase control in the a-b-c frame and real-time bus communication. When a phase fault occurs, instead of halting the whole module, the proposed strategy isolates only the faulted bridge arm, and then recalculates the distribution coefficients and transfers the compensation capacity to the same phases of the other normal modules, resulting in a continuous operation of the faulted module and optimization of the remaining usable power devices. Through steady-state analysis of the post-fault circuit, the system stability and control reliability are proven to be high enough to guarantee its engineering application value. Finally, a prototype is established and experimental results show the validity and feasibility of the proposed multi-modular system and its fault-tolerant control strategy.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Akagi H, 2005. Active harmonic filters. Proc IEEE, 93(12): 2128–2141. https://doi.org/10.1109/JPROC.2005.859603
Bhattacharya A, Chakraborty C, Bhattacharya S, 2012. Parallelconnected shunt hybrid active power filters operating at different switching frequencies for improved performance. IEEE Trans Ind Electron, 59(11):4007–4019. https://doi.org/10.1109/TIE.2011.2173893
Chen Z, Luo YP, Chen M, 2012. Control and performance of a cascaded shunt active power filter for aircraft electric power system. IEEE Trans Ind Electron, 59(9):3614–3623. https://doi.org/10.1109/TIE.2011.2166231
Errabelli RR, Mutschler P, 2012. Fault-tolerant voltage source inverter for permanent magnet drives. IEEE Trans Power Electron, 27(2):500–508. https://doi.org/10.1109/TPEL.2011.2135866
Gou B, Ge XL, Liu YC, et al., 2016. Load-current-based current sensor fault diagnosis and tolerant control scheme for traction inverters. Electron Lett, 52(20):1717–1719. https://doi.org/10.1049/el.2016.0675
Guzman R, de Vicuna LG, Morales J, et al., 2016. Model-based control for a three-phase shunt active power filter. IEEE Trans Ind Electron, 63(7):3998–4007. https://doi.org/10.1109/TIE.2016.2540580
Karimi S, Poure P, Saadate S, 2009. Fast power switch failure detection for fault tolerant voltage source inverters using FPGA. IET Power Electron, 2(4):346–354. https://doi.org/10.1049/iet-pel.2008.0075
Khadem SK, Basu M, Conlon MF, 2014. Harmonic power compensation capacity of shunt active power filter and its relationship with design parameters. IET Power Electron, 7(2):418–430. https://doi.org/10.1049/iet-pel.2013.0098
Lee TL, Wang YC, Li JC, et al., 2015. Hybrid active filter with variable conductance for harmonic resonance suppression in industrial power systems. IEEE Trans Ind Electron, 62(2):746–756. https://doi.org/10.1109/TIE.2014.2347008
Lim PY, Azli NA, 2007. A modular structured multilevel inverter active power filter with unified constant-frequency integration control for nonlinear AC loads. 7th Int Conf on Power Electronics and Drive Systems, p.244–248. https://doi.org/10.1109/PEDS.2007.4487708
Liu TF, Jiang ZP, 2015. A small-gain approach to robust event-triggered control of nonlinear systems. IEEE Trans Autom Contr, 60(8):2072–2085. https://doi.org/10.1109/TAC.2015.2396645
Naidu M, Gopalakrishnan S, Nehl TW, 2010. Fault tolerant permanent magnet motor drive topologies for automotive x-by-wire systems. IEEE Trans Ind Appl, 46(2):841–848. https://doi.org/10.1109/TIA.2009.2039982
Olm JM, Ramos GA, Costa-Castello R, 2011. Stability analysis of digital repetitive control systems under timevarying sampling period. IET Contr Theory Appl, 5(1): 29–37. https://doi.org/10.1049/iet-cta.2009.0308
Ramos GA, Costa-Castello R, 2012. Power factor correction and harmonic compensation using second-order oddharmonic repetitive control. IET Contr Theory Appl, 6(11):1633–1644. https://doi.org/10.1049/iet-cta.2011.0272
Sjolte J, Tjensvoll G, Molinas M, 2014. Reliability analysis of IGBT inverter for wave energy converter with focus on thermal cycling. 9th Int Conf on Ecological Vehicles and Renewable Energies, p.1–7. https://doi.org/10.1109/EVER.2014.6844037
Sun BG, Xie YX, Ma H, 2015. An enhanced repetitive control strategy for shunt active power filter with LCL output filter. 41st Annual Conf of the IEEE Industrial Electronics Society, p.1351–1356. https://doi.org/10.1109/IECON.2015.7392288
Wang YF, Xu QW, Chen GZ, 2015. Simplified multi-modular shunt active power filter system and its modelling. IET Power Electron, 8(6):967–976. https://doi.org/10.1049/iet-pel.2014.0572
Xu JM, Xie SJ, Tang T, 2014. Improved control strategy with grid-voltage feedforward for LCL-filter-based inverter connected to weak grid. IET Power Electron, 7(10): 2660–2671. https://doi.org/10.1049/iet-pel.2013.0666
Zhang QM, Liu HJ, Chen HK, et al., 2008. A precise and adaptive algorithm for interharmonics measurement based on iterative DFT. IEEE Trans Power Del, 23(4): 1728–1735. https://doi.org/10.1109/TPWRD.2008.919032
Zhou DH, Zhao J, Liu Y, 2016. Independent control scheme for nonredundant two-leg fault-tolerant back-to-back converter-fed induction motor drives. IEEE Trans Ind Electron, 63(11):6790–6800. https://doi.org/10.1109/TIE.2016.2581761
Author information
Authors and Affiliations
Corresponding author
Additional information
Project supported by the National Natural Science Foundation of China (No. 51777186)
Rights and permissions
About this article
Cite this article
Xu, Qw., Zhan, Jx., Xiao, L. et al. A multi-modular shunt active power filter system and its novel fault-tolerant strategy based on split-phase control and real-time bus communication. Frontiers Inf Technol Electronic Eng 19, 1166–1179 (2018). https://doi.org/10.1631/FITEE.1601296
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1631/FITEE.1601296