Abstract
For accurate prediction of via yield, via chains are usually fabricated on test chips to investigate issues about vias. To minimize the randomness of experiments and make the testing results more convincing, the confidence level and estimation precision of the via failure rate are investigated in this paper. Based on the Poisson yield model, the method of determining an adequate number of total vias is obtained using the law of large numbers and the de Moivre-Laplace theorem. Moreover, for a specific confidence level and estimation precision, the method of determining a suitable via chain length is proposed. For area minimization, an optimal combination of total vias and via chain length is further determined. Monte Carlo simulation results show that the method is in good accordance with theoretical analyses. Results of via failure rates measured on test chips also reveal that via chains designed using the proposed method has a better performance. In addition, the proposed methodology can be extended to investigate statistical significance for other failure modes.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Cabrini, A., Cantarelli, D., Cappelletti, P., Casiraghi, R., Maurelli, A., Pasotti, M., Rolandi, P.L., Torelli, G., 2006. A test structure for contact and via failure analysis in deep-submicrometer CMOS technologies. IEEE Trans. Semicond. Manuf., 19(1):57–66. [doi:10.1109/TSM.2005.863226]
de Cooman, G., Miranda, E., 2008. Weak and strong laws of large numbers for coherent lower previsions. J. Statist. Plann. Infer., 138(8):2409–2432. [doi:10.1016/j.jspi.2007.10.020]
Gill, J., Sullivan, T., Yankee, S., Barth, H., von Glasow, A., 2002. Investigation of Via-Dominated Multi-modal Electromigration Failure Distributions in Dual Damascene Cu Interconnects with a Discussion of the Statistical Implications. Proc. 40th Annual Reliability Physics Symp., p.298–304. [doi:10.1109/relphy.2002.996652]
Hess, C., Stine, B.E., Weiland, L.H., Mitchell, T., Karnett, M.P., Gardner, K., 2003. Passive multiplexer test structure for fast and accurate contact and via fail rate evaluation. IEEE Trans. Semicond. Manuf., 16(2):259–265. [doi:10.1109/TSM.2003.811939]
Konno, N., 2002. Quantum random walks in one dimension. Quant. Inf. Process., 1(5):345–354. [doi:10.1023/A:1023413713008]
Li, Y.G., Tan, S.H., Sun, W.R., 2008. Test Structure Failed Node Localization and Analysis from Die Backside. 15th Int. Symp. on the Physical and Failure Analysis of Integrated Circuits, p.1–3. [doi:10.1109/IPFA.2008.4588165]
Liang, J., Chen, S., Yoshimura, T., 2010. Redundant Via Insertion Based on Conflict Removal. Proc. 10th IEEE Int. Conf. on Solid-State and Integrated Circuit Technology, p. 794–796. [doi:10.1109/ICSICT.2010.5667425]
Matsubara, Y., Watanabe, T., 2006. 45nm Node Categorized Via Chain Resistance and Image by Optical Beam Induced Resistance Changes (OBIRCH) Method. Proc. 44th Annual IEEE Int. Reliability Physics Symp., p.643–644. [doi:10.1109/RELPHY.2006.251303]
Montgomery, D.C., Runger, G.C., 2002. Applied Statistics and Probability for Engineers (3rd Ed.). John Wiley & Sons, New York, p.356–359.
Morgan, S., de Munari, I., Scorzoni, A., Fantini, F., Magri, G., Zaccherini, C., Caprile, C., 1996. Test Structures for Electromigration Evaluation in Submicron Technology. Proc. IEEE Int. Conf. on Microelectronic Test Structures, p.283–287. [doi:10.1109/ICMTS.1996.535661]
Nasuno, T., Matsubara, Y., Minami, A., Uchida, N., Kobayashi, H., Aoyama, H., Tsuda, H., Tsujita, K., Wakamiya, W., Kobayashi, N., 2004. Test Structure for Fixing OPC of 200 nm Pitch Via Chain Using Inner and Outer Dummy Via Array. Proc. Int. Conf. on Microelectronic Test Structures, p.23–28. [doi:10.1109/ICMTS.2004.1309295]
Plummer, J.D., Deal, M.D., Griffin, P.B., 2000. Silocon VLSI Technology: Fundamentals, Practice, and Modeling. Prentice Hall, Upper Saddle River, New Jersey, p.157.
Rathore, H.S., 1982. Via Resistance as a Technique to Control the Electromigration of Non-overlap Via Holes. 20th Annual Reliability Physics Symp., p.77–80. [doi:10.1109/IRPS.1982.363025]
Shih, D.Y., Yeh, H., Narayan, C., Lewis, J., Graham, W., Nunes, S., Paraszczak, J., McGouey, R., Galligan, E., Cataldo, J., et al., 1992. Factors Affecting the Interconnection Resistance and Yield in the Fabrication of Multilayer Polyimide/Metal Thin Film Structures. Proc. 42nd Electronic Components and Technology Conf., p.1002–1014. [doi:10.1109/ECTC.1992.204328]
Stapper, C.H., 1983. Modeling of integrated circuit defect sensitivities. IBM J. Res. Devel., 27(6):549–557. [doi:10.1147/rd.276.0549]
Welch, B.L., 1947. The generalization of ’student’s’ problem when several different population variances are involved. Biometrika, 34(1–2):28–35. [doi:10.2307/2332510]
Zhu, J.J., Luo, X.H., Chen, L.S., Ye, Y., Yan, X.L., 2012. Scratch-concerned yield modeling for IC manufacturing involved with a chemical mechanical polishing process. J. Zhejiang Univ.-Sci. C (Comput. & Electron.), 13(5):376–384. [doi:10.1631/jzus.C1100242]
Author information
Authors and Affiliations
Corresponding author
Additional information
Project (No. 2009ZX02023-004-1) supported by the National Science and Technology Major Project, China
Rights and permissions
About this article
Cite this article
Luo, Xh., Chen, Ls., Zhu, Jj. et al. A new via chain design method considering confidence level and estimation precision. J. Zhejiang Univ. - Sci. C 13, 702–710 (2012). https://doi.org/10.1631/jzus.C1200079
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1631/jzus.C1200079