Abstract
It is shown that, at the early stage of the change in the technical state of an object, the measurement information is partially lost because of the dynamics of the changes in the characteristics of the signals at the output of the corresponding sensors. When the traditional technique is used, this can be found only if the process is pronounced; for this reason, sometimes it is impossible to prevent accidents that can have disastrous effects. The proposed techniques for determination of the estimates of the position-binary and spectral noise indicators reflect with high accuracy the beginning of any microchange in the control objects with the use of excess-frequency analysis by extraction of additional information from both the desired signal and the noise.
Similar content being viewed by others
References
Aliev, T., Digital Noise Monitoring of Defect Origin, London: Springer-Verlag, 2007.
Aliev, T., Robust Technology with Analysis of Interference in Signal Processing, New York: Kluwer Academic/Plenum Publishers, 2003.
Musaeva, N.F., Methodology of Calculating Robustness as an Estimator of the Statistical Characteristics of a Noisy Signal, New York: Automatic Control and Computer Sciences, Allerton Press, Inc., 2005, vol. 39, no. 5, pp. 53–62.
Aliev, T.A., Eksperimental’nyi analiz (Experimental Analysis), Moscow: Mashinostroenie, 1991.
Bendat, J.S. and Piersol, A.G., Random Data: Analysis & Measurement Procedures, Wiley-Interscience, 2000.
Preumont, A., Random Vibration and Spectral Analysis, New York: Kluwer Academic Publisher, 1994.
Mehrotra, A. and Sangiovanni-Vincentelli, A., Noise Analysis of Radio Frequency Circuits, New York: Kluwer Academic Publisher, 2004.
Aliev, T.A., Theoretical Basis of Noise Analysis and Noise Prognosis of Accidents, Kiber. i sist. anal., 2008, vol. 4, pp. 20–31.
Brantsevich, P.Yu., Algorithms for Determination of Amplitude and Phase Vibration Parameters, Materialy MNTK Novye informatsionnye tekhnologii v nauke i proizvodstve (Proc. Int. Sci. and Tech. Conf. New Information Technologies in Science and Industry), Minsk: BGUIR-MediumM, 1998, pp. 219–222.
Barkov, A.V., Barkova, N.A., and Azovtsev, A.Yu., Monitoring i diagnostika rotornykh mashin po vibratsii (Vibration Monitoring and Diagnostics of Rotary Machines), S.-Peterb.: Izd. Gos. Morskogo Tekh. Univ., 2000, http://www/vibrotek.com/russian/articles/book/index.htm.
Collacott, R.A., Structural Integrity Monitoring, London — New York: Chapman and Hall, 1989.
Ablomeiko, S.V. and Lagunovskii, D.M., Obrabotka izobrazhenii: tekhnologiya, metody, primeneniya (Image Processing: Technique, Methods, and Applications), Amalfeya, 2000.
Jin, J. and Shin, J., Feature-Preserving Data Compression of Stamping Tonnage Information Using Wavelets, Technometrics, 1999, vol. 41, no. 4, pp. 327–339.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © T.A. Aliev, G.A. Guliev, A.G. Rzaev, F.G. Pashaev, A.M. Abbasov, 2009, published in Avtomatika i Vychislitel’naya Tekhnika, 2009, No. 3, pp. 57–69.
About this article
Cite this article
Aliev, T.A., Guliev, Q.A., Rzaev, A.H. et al. Position-binary and spectral indicators of microchanges in the technical states of control objects. Aut. Conrol Comp. Sci. 43, 156–165 (2009). https://doi.org/10.3103/S0146411609030067
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0146411609030067