Abstract
Superficial and electroplating defects are the most commonly seen flaws on the lens collar. The former arose from cutter offset or chip winding during the cutting process, while the later occurred if the surface was stained with rough or foreign material during the electroplating process. Relying on human inspection to ensure quality of a lens collar was time consuming and accounted for occupational injury. Thus, implementation of automatic inspection technology became invertible in the mass production environment. Since the texture on the surface of lens collar was not only regular but also statistical, the system used image restoration based on discrete Fourier transformation (DFT) to detect defects embedding on those two types of textures.
Similar content being viewed by others
References
Rosati, G., Boschetti, G., Biondi, A., and Rossi, A., Real-time defect detection on highly reflective curved surfaces, Opt. Lasers Eng., 2009, vol. 47, no. 3, pp. 379–384.
Chen, S.H., Inspecting lens collars for defects using discrete cosine transformation based on an image restoration scheme, IET Image Process., 2016, vol. 10, no. 6, pp. 474–482.
Tsai, D.M. and Hsieh, C.Y., Automated surface inspection for directional textures, Image Vision Comput., 1999, vol. 18, no. 1, pp. 49–62.
Tsai, D.M. and Chiang, C.H., Automatic band selection for wavelet reconstruction in the application of defect detection, Image Vision Comput., 2003, vol. 21, no. 5, pp. 413–431.
Perng, D.B. and Chen, S.H., Directional textures auto-inspection using discrete cosine transform, Int. Prod. Res., 2011, vol. 49, no. 23, pp. 7171–7187.
Chen, S.H. and Perng, D.B., Directional textures auto-inspection using principal component analysis, Int. Adv. Manuf. Technol., 2011, vol. 55, nos. 9–12, pp. 1099–1110.
Lu, C.J. and Tsai, D.M., Automatic defect inspection for LCDs using singular value decomposition, Int. Adv. Manuf. Technol., 2005, vol. 25, nos. 1–2, pp. 53–61.
Perng, D.B. and Chen, S.H., Automatic surface inspection for directional textures using nonnegative matrix factorization, Int. J. Adv. Manuf. Technol., 2010, vol. 48, nos. 5–8, pp. 671–689.
Tsai, D.M. and Huang, T.Y., Automated surface inspection for statistical textures, Image Vision Comput., 2003, vol. 21, no. 4, pp. 307–323.
Author information
Authors and Affiliations
Corresponding author
Additional information
The article is published in the original.
About this article
Cite this article
Chen, SH. Inspecting mixed textured lens collar images using discrete Fourier transformation. Aut. Control Comp. Sci. 51, 248–253 (2017). https://doi.org/10.3103/S0146411617040095
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0146411617040095