ABSTRACT
MyLight is a lamp that is different for each customer, due to a manufacturing method (selective laser sintering) that allows for the production of an object without using a mold. The lamps are simply "printed" three-dimensionally.
Index Terms
- MyLight.MGX
Recommendations
Stencil mask using ultra-violet-curable positive-tone electron beam resist
AbstractStencil masks are used in fabrication processes such as photolithography for circuit patterning and micro-electromechanical systems devices. A stencil mask has micro- and nano-scale through-hole patterns on a substrate, and the metal ...
Graphical abstractDisplay Omitted
Highlights- Preparation of UV-curable positive-tone EB resist was succeeded.
- Slit and ...
Combination of thick resist and electroforming technologies for monolithic inkjet application
This paper reports a novel method for fabricating a monolithic inkjet chip by combination of thick resist photolithography and electroforming technologies. It integrates two-step photolithography process by two kinds of thick photoresists, SU-8 and JSR, ...
Increasing the bonding strength of chips on flex substrates using thermosonic flip-chip bonding process with nonconductive paste
Thermosonic flip-chip bonding process with a nonconductive paste (NCP) was employed to improve the processability and bonding strength of the flip-chip onto flex substrates (FCOF). A non-conductive paste was deposited on the surface of the copper ...
Comments