skip to main content
10.1145/3305275.3305316acmotherconferencesArticle/Chapter ViewAbstractPublication PagesisbdaiConference Proceedingsconference-collections
short-paper

Design and Optimization of Injection Mold for Camera Shell Based on Mold Flow Analysis

Published: 29 December 2018 Publication History

Abstract

Through analyzing the technological features of the SONY the camera shell, an injection mold was designed with the help of software Creo. Secondly, the structural analysis was carried out for the main molds, and the best parting surface was found out, and the design of the sprue bushing, positioning ring, shunting channel and cold material hole were explained. Finally, Moldflow software was used to complete network division and network repair, and the best gate location, filling time, filling pressure, filling temperature were determined. The flow front temperature and cavitation position were analyzed. The results show that the product design is optimized, the production efficiency and the product quality were improved.

References

[1]
Li Fazhi. Advanced mold manufacturing technology. BEIJING: Mechanical Industry Press, 2003.
[2]
Cui Kang, Wen Huaixing. Injection Mold Design of Digital Camera Shell Based on Pro/E and Mold Flow{J}.China Plastics Industry, 2012, 9 (40):.60--63.
[3]
Wang Gang, Shan Yan. MoldflowMold analysis application examples {M}.BEIJING: Tsinghua University Press, 2005.
[4]
Xiao Xiaofeng, Song Qi, Xue Qiong. Design of Spin-tubś Hot Runner Injection Mold based on Pro/E {J}. Plastics, 2012, 41(1):101--104.
[5]
Feng Jie, Liu Xiaojun (2017). Design of Upright Intelligent Vehicle Based on Camera. Acta Electronica Malaysia, 1(1): 09--11.
[6]
Fu Shijun. Designing of Injection Mould for Shell Part Based on Pro/E {J}. Plastics, 2009, 38(5):114--116.
[7]
Fan Xiying, GUO Yonghuan. UG/NX_based Design of Injection Mould and Mould Flow Analysis {J}. Mold Industry, 2009, 35(8):50--54.

Index Terms

  1. Design and Optimization of Injection Mold for Camera Shell Based on Mold Flow Analysis

      Recommendations

      Comments

      Information & Contributors

      Information

      Published In

      cover image ACM Other conferences
      ISBDAI '18: Proceedings of the International Symposium on Big Data and Artificial Intelligence
      December 2018
      365 pages
      ISBN:9781450365703
      DOI:10.1145/3305275
      Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]

      In-Cooperation

      • International Engineering and Technology Institute, Hong Kong: International Engineering and Technology Institute, Hong Kong

      Publisher

      Association for Computing Machinery

      New York, NY, United States

      Publication History

      Published: 29 December 2018

      Permissions

      Request permissions for this article.

      Check for updates

      Author Tags

      1. Camera shell
      2. Moldflow
      3. injection mold
      4. mold flow analysis

      Qualifiers

      • Short-paper
      • Research
      • Refereed limited

      Conference

      ISBDAI '18

      Acceptance Rates

      ISBDAI '18 Paper Acceptance Rate 70 of 340 submissions, 21%;
      Overall Acceptance Rate 70 of 340 submissions, 21%

      Contributors

      Other Metrics

      Bibliometrics & Citations

      Bibliometrics

      Article Metrics

      • 0
        Total Citations
      • 157
        Total Downloads
      • Downloads (Last 12 months)15
      • Downloads (Last 6 weeks)1
      Reflects downloads up to 14 Jan 2025

      Other Metrics

      Citations

      View Options

      Login options

      View options

      PDF

      View or Download as a PDF file.

      PDF

      eReader

      View online with eReader.

      eReader

      Media

      Figures

      Other

      Tables

      Share

      Share

      Share this Publication link

      Share on social media