ABSTRACT
This research was to study the design of a data logger with IEC standard for PV system using Arduino microcontroller. The Arduino microcontroller received a signal from analog sensor. The main processor board of the Arduino microcontroller was evaluated and display to 20 x 4 characters (4 rows and 20 characters per row) on LCD monitor. Then, the data were recorded in a memory card. Furthermore, the data logger was tested with the pyranometer, fixed PV module and tracking PV module. Those of the values were compared with the data from a standard data logger (Wisco DL 2100) and calculated the values of percentage of an error. It was observed that the maximum values of the percentage of the error from the recorded data was 25.60. The minimum values of the percentage of the error from the recorded data was 0.
- Ministry of Energy. 2018. Solar energy in Thailand. {Online}, Available: http://www.dede.go.th/Download/files/AEDP2015Finalversion.pdf (Oct. 10, 2018).Google Scholar
- Rewthong, O., Chuarung, S., Eamthanakul, B., and Luewarasirikul, N. 2018. Study the electrical energy consumption in administrative office in faculty of science and technology for leading to evaluation the model of electrical energy producing from solar cell system. In Proceedings of the Research For a 15th International Conference (Hamburg, Germany, February 22--23, 2018).Google Scholar
- Ding, C. 2015. Design and analysis of a labview and Arduino-based automatic solar tracking system. {Online}, Available: https://scholarworks.moreheadstate.edu/cgi/viewcontent.cgi?article=1038&context=msu_theses_dissertations (Dec. 30, 2018).Google Scholar
- Yingprayoon, J., Latipov, Z. A., and Sabirova, F. M. 2014. Research on the contribution of the Nobel Prize laureates in Physics to the development of modern equipment and technologies in technical universities. European Journal of Science and Technology. 10, 6 (Dec. 2014), 193--202.Google Scholar
- Leauhatong, T. 2011. Microcontroller and applications. {Online}, Available: http://thurdsak.files.wordpress.com (Oct. 15, 2018).Google Scholar
Recommendations
Design of the Electrical Energy Meter Leading to an Automatic Evaluation of the Preliminary Cost of Electrical Energy Consumption
ICICM '19: Proceedings of the 9th International Conference on Information Communication and ManagementThis research was to study the design and construction of the electrical energy meter leading to an automatic evaluation of the preliminary electrical energy expenses. The design of the electrical energy meter and the standard energy meter were used to ...
Evaluation of Maximum Power Point Tracking Techniques in PV Systems Using MATLAB/Simulink
GREENTECH '14: Proceedings of the 2014 Sixth Annual IEEE Green Technologies ConferenceThis paper mainly focuses on the performance evaluation of "Perturb& Observe" and "Incremental Conductance" algorithms as the most commonly utilized two Maximum Power Point Tracking (MPPT) techniques for photovoltaic systems. Matlab/SIMULINK platform is ...
Hydrogen production from combined wind/PV energy hybrid system in Malaysia
EE'09: Proceedings of the 4th IASME/WSEAS international conference on Energy & environmentHydrogen is widely considered be the fuel of the near future. Combined wind/PV energy hybrid systems can be used to sources energy to hydrogen production. This paper describes design, simulation and feasibility study of a hybrid energy system for a ...
Comments