ABSTRACT
With the continuous increase in number of people suffering from diabetes, the demand of a device that can noninvasively monitor blood glucose level has been greater. The goal of the study is to develop a device that can monitor the blood glucose level that would not cause any discomfort to the patients by utilizing reflectance mode photoplethysmography equipped with a filtering technique, Moving Average filter. Initially, the device prompts the user to choose from two categories depending on his condition: diabetic or non-diabetic, and then would choose between the two modes: fasting or post meal mode. The parameters utilized in the study are the force in Newton (N) which corresponds to the applied pressure on the finger, the peak-to-peak voltage (V) of the photopletyhsmography signal, and lastly, the blood glucose level measured in milligram per deciliter (mg/dL). The force is acquired using a force sensitive resistor that is incorporated in the ring. The suggested device employs a photoplethysmography sensor which can diagnose variations on microvascular bed of tissue. The variations in the distribution of blood volume have a significant relation with the measurement of blood glucose level. The technique used to estimate the photoplethysmography in terms of peak-to-peak voltage is the Moving Average filter, and the result is then compared to that of the OneTouch glucometer and Fasting Plasma Glucose. From the results acquired, two equations are derived which output the blood glucose level for diabetic and non-diabetic patients in mg/dL. The equations are described to be both linear, a positive correlation for non-diabetic patients with a percentage of 70.3004% and a negative correlation for the diabetic with a percentage of 91.9226%.
- T. Tamaura, Y. Maeeda, M. Seekine and M. Yoshiada, "Wearable Photoplethysmographic Sensors---Past and Present," Electronics 2014, vol. 3, pp. 282--302, 2014.Google Scholar
- G. H. Tan, "Diabetes Care in the Philippines," Annals of Global Health, vol. 81, no. 6, pp. 863--869, 2015.Google ScholarCross Ref
- Diabetese Inself-Management, "What is a normal blood sugar level," 2016. {Online}. Available: https://www.diabetesselfmanagement.com/blog/what-is-a-normal-blood-sugar-level/. {Accessed 1 November 2016}.Google Scholar
- Massachusetts Institute of Technology School of Engineering, "Ask an Engineering: How Do Glucometers Work?," 2011. {Online}. Available: https://engineering.mit.edu/engage/ask-an-engineer/how-do-glucometers-work/. {Accessed 1 November 2016}.Google Scholar
- S. H. Golden and T. Sapir, "Methods for Insulin Delivery and Glucose Monitoring in Diabetes: A Comparative Effectiveness Review," Journal of Managed Care Pharmacy, vol. 18, no. 6, pp. 1--17, 2012.Google ScholarCross Ref
- J. Lu, R. Bu, Z. Sun, H. Jin, Y. Wang, Q. Lu, S. Wang, L. Li, Z. Xie and B. Yang, "Comparable Efficacy of Self-monitoring of Quantitative Urine Glucose with Self-Monitoring of Blood Glucose on Glycaemic Control in Non-insulin-treated Type 2 Diabetes," Diabetes Research and Clinical Practice, vol. 93, no. 2, pp. 179--186, 2011.Google ScholarCross Ref
- G. Song, C. Zhao and Y. Sun, "A classification-based fault detection method for Continuous glucose monitoring (CGM)," in IEEE 2016 12th World Congress on Intelligent Control and Automation (WCICA), Guilin, China, 2016.Google Scholar
- C. Manlises, J. D. Cruz, J. Fausto, L. Muralla, D.M.Payas and M. Posada, "Monitoring of Blood Pressure Using Photoplethysmographic (PPG) Sensor with Aromatheraphy Diffusion," in IEEE International Conference on Control System, Computing and Engineering (ICCSCE), Penang, Malaysia, 2016.Google Scholar
- F. Ubels, J. Muntinnga, T. Linksys, K. Hiogenberg, R. Dulart, W. Reatsma and A. Smait, "Redistribution of blood volume in type I diabetes," Diabetokas, vol. 44, no. 4, pp. 429--432, 2001.Google Scholar
- B. Paulo, S. Manual and Z. Alexis, "Design and Development of Non invasive Glucose Measurement System," in 2010 1st International Symposium on Physics and Technology of Sensors (ISPTS), Pune, India, 2012.Google Scholar
- C. Pujary, "Investigation of Photodetector Optimization in Reducing Power Consumption by a Noninvasive Pulse Oximeter Sensor," Advantages and Disadvantages of Reflectance and Transmittance Pulse Oximetry, pp. 9--10, 2004.Google Scholar
- J. Webster, "Photoplethysmography (PPG) system," in Medical instrumentation, application and design, 2010.Google Scholar
- J. Spigulis, "Optical non-invasive monitoring of skin blood pulsations," Optical Materials and Applications, vol. 44, pp. 1850--1857, 2005.Google Scholar
- Wikipedia, "Processing (programming language)," 2015. {Online}. Available: Available: https://en.wikipedia.org/wiki/Processing_(programming_language). {Accessed 1 November 2016}.Google Scholar
- Gaussianwaves.com -- Signal Processing Simplified, "Moving Average Filter (MA Filter)," 2010. {Online}. Available: https://www.gaussianwaves.com/2010/11/moving-average-filter-ma-filter-2/. {Accessed 1 November 2016}.Google Scholar
- A. Paglinawan, W. Chung, Y. Wang, S. Cheng, W. Lee, A. Albason, C. Chuang and S. Lou, "A System Design with Mode-Switching Power Management for Closed-loop Implantable Glucose Biosensor," Journal of Medical and Biological Engineering, vol. 31, no. 5, pp. 321--329, 2011.Google ScholarCross Ref
Index Terms
- Application of Reflectance Mode Photoplethysmography for Non-Invasive Monitoring of Blood Glucose Level with Moving Average Filter
Recommendations
Photoplethysmography Circuit Design for Peak-to-Peak Voltage Monitoring via Arduino Uno with Moving Average Filter
ICBET '19: Proceedings of the 2019 9th International Conference on Biomedical Engineering and TechnologyThis paper presents a circuit design which can capture photoplethysmography signal and estimate its peak-to-peak voltage reading with the aid of an Arduino microcontroller. Photoplethysmography is a non-invasive optical technique used to detect blood ...
Non-invasive estimate of blood glucose and blood pressure from a photoplethysmograph by means of machine learning techniques
Objective: This work presents a system for a simultaneous non-invasive estimate of the blood glucose level (BGL) and the systolic (SBP) and diastolic (DBP) blood pressure, using a photoplethysmograph (PPG) and machine learning techniques. The method is ...
Classification of blood pressure in critically ill patients using photoplethysmography and machine learning
Highlights- Estimation of blood pressure values using pulse rate variability features shows promise for the continuous, non-invasive measurement of systolic, diastolic, ...
AbstractObjective: The aim of this study was to evaluate the capability of features extracted from photoplethysmography (PPG) based Pulse Rate Variability (PRV) to classify hypertensive, normotensive and hypotensive events, and ...
Comments