skip to main content
10.1145/3396743.3396749acmotherconferencesArticle/Chapter ViewAbstractPublication PagesmsieConference Proceedingsconference-collections
research-article

Effects of Glovebox Glove Properties on Hand Strength

Authors Info & Claims
Published:29 May 2020Publication History

ABSTRACT

Glovebox glove usage has been known to impair hand strength such as maximum voluntary grip and key pinch strength. This study assesses the effects of three material properties of glovebox glove on hand strength to offer design/selection recommendations to provide effective prevention for Musculoskeletal disorders (MSDs) in the hand and wrist during glovebox operations. Three commercially available glovebox gloves, namely butyl, hypalon, and neoprene in 0.015" and 0.03" thickness were included for evaluation. The correlation matrix indicates that the grip strength is the only dependent variable that shows statistically significant correlations with most of the independent variables except friction, and quadratic and cubic components of friction variable. Thickness and pliability are inversely correlated to the maximum grip strength. Stepwise regression shows that the interaction of thickness and pliability is the only variable included in the final equation. To minimize effects of glove usage when performing glovebox tasks involving a gripping hand, material thickness and pliability parameters could be included for glove design and selection purposes to improve worker health and safety.

References

  1. Glovebox Society. 2007. Guidelines for Gloveboxes Third Edition (AGS-G001--2007). American Glovebox Society, Santa Rosa, CA.Google ScholarGoogle Scholar
  2. Sung, P.C. 2014. Effects of glovebox gloves on grip and key pinch strength and contact forces for simulated manual operations with three commonly used hand tools. Ergonomics, 57 (October, 2014), 1512--1525. DOI=https://doi.org/10.1080/00140139.2014.933888.Google ScholarGoogle ScholarCross RefCross Ref
  3. Dianat, I., Haslegrave, C. M., and Stedmon A. W. 2012. Methodology for Evaluating Gloves in Relation to the Effects on Hand Performance Capabilities: A Literature Review. Ergonomics, 55, 1429--1451. DOI=https://doi.org/10.1080/00140139.2012.708058.Google ScholarGoogle ScholarCross RefCross Ref
  4. NIOSH 1997. Musculoskeletal disorders and workplace factors -A critical review of epidemiologic evidence for work-related musculoskeletal disorders of the neck, upper extremity, and low back. Bernard, B. P. edited, NIOSH publication 97--104, National Institute of Occupational Safety and Health, Cincinnati, OH.Google ScholarGoogle Scholar
  5. BLI 2019. Occupational disease case benefits under labor insurance. Bureau of Labor Insurance, Ministry of Labor, Taiwan, http://statdb.mol.gov.tw/html/mon/26090.htm.Google ScholarGoogle Scholar
  6. Sung, P.C. and Chiu, Y.S.P. 2019. Subjective Evaluation of Glovebox Gloves on Hand Tactility and Discomfort. MSIE 2019 Proceedings of the 2019 International Conference on Management Science and Industrial Engineering, May 24--26, Phuket, Thailand, 245--249. DOI= https://10.1145/3335550.3335567.Google ScholarGoogle Scholar
  7. Riley, M.W. and Cochran, D.J. 1988. Ergonomic aspects of gloves: design and use. In International Reviews of Ergonomics, 2, 233--250. D.J. Oborne Ed. Taylor & Francis, Abingdon, OX.Google ScholarGoogle Scholar
  8. Bishu, R.R., Batra, S., Cochran, D.J. and Riley, M.W. 1987. Glove effect on strength: an investigation of glove attributes, Proceedings of the Human Factors Society-31st Annual Meeting, 901--905.Google ScholarGoogle Scholar
  9. Kinoshita, H. 1999. Effect of gloves on prehensile forces during lifting and holding tasks, Ergonomics, 42 (10), 1372--1385. DOI= https://doi.org/10.1080/001401399185018.Google ScholarGoogle ScholarCross RefCross Ref
  10. Batra, S., Bronkema, L.A., Wang, M.J., Bishu, R.R. 1994. Glove attributes: can they predict performance? International Journal of Industrial Ergonomics, 14, 201--209. DOI=https://doi.org/10.1016/0169--8141(94)90096--5.Google ScholarGoogle ScholarCross RefCross Ref
  11. Chang, C.H and Shih, Y.C. 2007. The effects of glove thickness and work load on female hand performance and fatigue during an infrequent high-intensity gripping task, Applied Ergonomics, 38(3), 317--324. DOI=https://doi.org/10.1016/j.apergo.2006.04.024.Google ScholarGoogle ScholarCross RefCross Ref
  12. Hur, P., Motawar, B., and Seo, N. J. 2012. Hand breakaway strength model---Effects of glove use and handle shapes on a person's hand strength to hold onto handles to prevent fall from elevation, Journal of Biomechanics, 45(6), 958--964. DOI= https://doi.org/10.1016/j.jbiomech.2012.01.013.Google ScholarGoogle ScholarCross RefCross Ref
  13. Bronkema-Orr, L. and Bishu, R.R. 1996. The effects of glove frictional characteristics and load on grasp force and grasp control, Proceedings of the Human Factors Society-40th Annual Meeting, September 2--6, Philadelphia, Pennsylvania, USA, 702--706.Google ScholarGoogle Scholar
  14. Tsaousidis, N. and Freivalds, A. 1998. Effects of gloves on maximal force and the rate of force development in pinch, wrist flexion and grip, International Journal of Industrial Ergonomics, 21, 353--360. DOI=https://doi.org/10.1016/S0169--8141(96)00086--8.Google ScholarGoogle ScholarCross RefCross Ref
  15. Caldwell, L.S., Chaffin, D.B., Dukes-Dobos, F.N., Kroemer, K.H.E., Laubach, L.L., Snook, S.H.L. and Wasserman, D.E. 1974, A proposed standard procedure for static muscle strength testing, American Industrial Hygiene Association Journal, 35, 201--206. DOI=https://doi.org/10.1080/0002889748507023.Google ScholarGoogle ScholarCross RefCross Ref
  16. Mathiowetz, V., Kashman, N., Volland, G., Weber, K., Dowe, M. 1985. Grip and pinch strength: normative data for adults, Arch Phys Med Rehabil, 66, 69--74.Google ScholarGoogle Scholar
  17. ASTM G115--93, Standard guide for measuring and reporting friction coefficients, Annual Books of ASTM standards, Vol 03.02.Google ScholarGoogle Scholar

Index Terms

  1. Effects of Glovebox Glove Properties on Hand Strength

        Recommendations

        Comments

        Login options

        Check if you have access through your login credentials or your institution to get full access on this article.

        Sign in
        • Published in

          cover image ACM Other conferences
          MSIE '20: Proceedings of the 2020 2nd International Conference on Management Science and Industrial Engineering
          April 2020
          341 pages
          ISBN:9781450377065
          DOI:10.1145/3396743

          Copyright © 2020 ACM

          Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]

          Publisher

          Association for Computing Machinery

          New York, NY, United States

          Publication History

          • Published: 29 May 2020

          Permissions

          Request permissions about this article.

          Request Permissions

          Check for updates

          Qualifiers

          • research-article
          • Research
          • Refereed limited
        • Article Metrics

          • Downloads (Last 12 months)5
          • Downloads (Last 6 weeks)1

          Other Metrics

        PDF Format

        View or Download as a PDF file.

        PDF

        eReader

        View online with eReader.

        eReader