Design and Implementation of the Lasers Control System for Thomson Scattering Diagnostics on EAST
Pages 501 - 504
Abstract
In order to meet the requirements of combined control of multiple pulsed lasers in Thomson scattering (TS) diagnostics of EAST tokamak and improve the time accuracy and resolution of plasma temperature and density measurement of EAST campaign, this paper introduces and implements a control system of multiple pulsed lasers based on FPGA. The control system of multiple pulsed lasers is designed as an exciter, which can provide accurate excitation signals for each laser device independently. After receiving the external trigger signal from the master control computer of EAST campaign, The control system of multiple pulsed lasers provides the excitation signal to the lasers correspondingly, including CLK and Q signals. The control system can set frequency, delay and other parameters for six pulsed lasers separately. This paper introduces the hardware and software design of the system, and discusses the technical parameters and accuracy of the system in detail. Finally, the experimental results are presented.
References
[1]
Wan, B. Recent experiments in the EAST and HT-7 superconducting tokamaks[J]. Nuclear Fusion, 2009, 49(10):104011.
[2]
Wan B, Li J, Guo H, et al. Progress of long pulse and H-mode experiments in EAST[J]. Nuclear Fusion, 2013, 53(10):104006.
[3]
Tokamak in Hefei Sets New Record with Steady State, High Performance Plasma[J]. Bulletin of the Chinese Academy of Sciences, 2017(02):8.
[4]
Zang Q, Zhao J, Yang L, et al. Upgraded multipulse laser and multipoint Thomson scattering diagnostics on EAST[J]. Review of Scientific Instruments, 2011, 82(6):063502.
[5]
Zang Q, Zhao J, et al. Development of a Thomson Scattering Diagnostic System on EAST[J]. Plasma Science and Technology, 12(2):144--148.
[6]
Yoshikawa, M, Morimoto, M, Shima, Y, et al. Electron Temperature and Density Measurements by Using Thomson Scattering System in GAMMA 10[J]. Fusion Science and Technology, 63(1T):127--130.
[7]
Yang L, Wan B N, Zhao J Y, et al. Design of Thomson Scattering Diagnostic System on EAST[J]. Plasma Science and Technology (3):284--288.2010,
[8]
Chen H, Zang Q, Han X F, et al. Automatic Beam Alignment System for Thomson Scattering Diagnostic on Experimental Advanced Superconducting Tokamak[J]. Journal of Fusion Energy, 2015, 34(5):1--9.
[9]
Shao C, Zang Q, Zhao J, et al. Vibration analysis of the Thomson Scattering diagnostics optical transmission system on EAST tokamak[C]// 7th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment. International Society for Optics and Photonics, 2014.
[10]
Monmasson, E, Cirstea, M.N. FPGA Design Methodology for Industrial Control Systems---A Review[J]. IEEE Transactions on Industrial Electronics, 54(4):1824--1842.
[11]
M.S. Masmoudi, Insop Song, Fakhreddine Karray, et al. Hardware/software approache for the FPGA implementation of a fuzzy logic controller[C]// Design and Test of Integrated Systems in Nanoscale Technology, 2006. DTIS 2006. International Conference on. IEEE, 2006.
[12]
Bouselham L, Hajji M, Hajji B, et al. Hardware implementation of fuzzy logic MPPT controller on a FPGA platform[C]// 2016.
[13]
Chen W, Yuan H, Wang Y. Design and implementation of Digital Fuzzy-PID controller based on FPGA[C]// Industrial Electronics and Applications, 2009. ICIEA 2009. 4th IEEE Conference on. IEEE, 2009.
Index Terms
- Design and Implementation of the Lasers Control System for Thomson Scattering Diagnostics on EAST
Recommendations
Design of Control System of the Dial Gauge Automatic Test System
ICICTA '09: Proceedings of the 2009 Second International Conference on Intelligent Computation Technology and Automation - Volume 01The dial gauge is used widely in the production line at present. The dial gauge has many types and huge quantity. At present, testing this type of instrument is mainly used manual observation method. By man-made factors, the testing efficiency and ...
Comments
Information & Contributors
Information
Published In
October 2020
566 pages
ISBN:9781450375535
DOI:10.1145/3421766
Copyright © 2020 ACM.
Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]
Publisher
Association for Computing Machinery
New York, NY, United States
Publication History
Published: 26 October 2020
Check for updates
Author Tags
Qualifiers
- Short-paper
- Research
- Refereed limited
Conference
AIAM2020
AIAM2020: 2nd International Conference on Artificial Intelligence and Advanced Manufacture
October 15 - 17, 2020
Manchester, United Kingdom
Acceptance Rates
AIAM2020 Paper Acceptance Rate 100 of 285 submissions, 35%;
Overall Acceptance Rate 100 of 285 submissions, 35%
Contributors
Other Metrics
Bibliometrics & Citations
Bibliometrics
Article Metrics
- 0Total Citations
- 31Total Downloads
- Downloads (Last 12 months)3
- Downloads (Last 6 weeks)0
Reflects downloads up to 24 Jan 2025
Other Metrics
Citations
View Options
Login options
Check if you have access through your login credentials or your institution to get full access on this article.
Sign in