skip to main content
10.1145/3429536acmotherconferencesBook PagePublication PageseeetConference Proceedingsconference-collections
EEET '20: Proceedings of the 2020 3rd International Conference on Electronics and Electrical Engineering Technology
ACM2020 Proceeding
Publisher:
  • Association for Computing Machinery
  • New York
  • NY
  • United States
Conference:
EEET '20: 2020 3rd International Conference on Electronics and Electrical Engineering Technology Kitakyushu Japan September 27 - 29, 2020
ISBN:
978-1-4503-8756-9
Published:
21 December 2020
In-Cooperation:
USM

Bibliometrics
Skip Abstract Section
Abstract

Since its inception in 2018, the EEET conference is held annually. The goal of this conference is to bring together the researchers from academia and industry as well as practitioners to share ideas, problems and solutions relating to the multifaceted aspects of Electronics and Electrical Engineering Technology. This year EEET 2020 conference focused on 6 major topics. They are (i) Electronics, (ii) Power Engineering, (iii) Control and Computer Systems, (iv) Telecommunication Engineering, (v) Computer Engineering and Imaging, and (vi) Sensor Engineering.

Skip Table Of Content Section
SESSION: Electrical Engineering and Automation
research-article
Application and Effect Analysis of Series Reactive Power Compensation in Low Voltage Distribution Network

The load terminal voltage at the low voltage side of the distribution network will drop when the user load increases. Thereby affecting the normal operation of the electrical appliance. Currently, the treatment approach to the voltage deviation at the ...

research-article
An Improved DC-Link Voltage Control Strategy of SAPF under Unbalanced Loads

The shunt active power filter (SAPF) based on three-leg voltage source converter is widely used to compensate the harmonic currents caused by nonlinear loads of grid. However, when the nonlinear loads are unbalanced, the grid currents compensated by ...

research-article
Power System Equivalent Parameters Tracking with PSO Based Optimal Quadratic Form Method

The Thevenin equivalent parameters seen at the point of common coupling (PCC) is an important parameter for power system planning and operation, voltage stability. This paper presents a novel algorithm of tracking the power system equivalent parameters ...

research-article
Research on EMC Tests of Intelligent Monitoring Devices for Metal-Oxide Surge Arresters

According to the structure and working principle of metal-oxide surge arrester (OMA) intelligent monitoring device (IMD), this paper analyses the electromagnetic environment of it and obtains the importance and necessity of studying electromagnetic ...

research-article
Effect of Loading Direction on the Mechanical Responses of Transmission Tower

High-voltage transmission towers, as support points for overhead transmission lines, are very sensitive to slope deformation, and extreme weather conditions such as heavy snow and hail can cause large changes in their internal stress distribution. It is ...

research-article
Research on Detection Method and Test of Generator Imbalance Fault

Based on techniques of time-domain index feature extraction and principal component analysis (PCA), a method for unbalanced fault diagnosis is proposed in this paper. Five dimensionless factors corresponding to IMF are calculated after the original data ...

research-article
The Application of Synchro Transmitter in the Material Distribution Angle Control of a Blast Furnace

A material charging system is a critical process in a blast furnace. Raw materials are transported from the stock house to the top of furnace and distributed into the furnace. To put defined amounts of materials into the preset position, the control and ...

SESSION: Modern Electronic Technology and Intelligent Control
Article
A Study on Real-Time Modification of the Refractive Index of A Surrounding Medium using a Uniform Microsphere In Digital Holographic Microscopy

An accurate refractive index of the surrounding medium is required to measure the accurate depth of the specimen in digital holographic microscopy (DHM). Many researchers have reported a method that uses blood smear to avoid overlapping of red blood ...

research-article
Remote Monitoring Applying IoT to Improve Control of Medication Adherence in Geriatric Patients with a complex Treatment Regimen, Lima-Peru

Health care has changed profoundly thanks to the continuous improvement of electronic devices, recent rapid progress in wireless communications and microsystems has allowed the opportunity to automatically collect reliable patient data, yet ...

research-article
3D Optical Encryption System using Merging Reconstruction Method

In this paper, we propose a photon-counting double random phase encryption with merging reconstruction. Double random phase encryption (DRPE) is a simple and secure optical encryption technique using phase random masks. To enhance the security level, a ...

research-article
Dealing with Intractability of Information System Subsystems Development Order via Control Flow Graph Reducibility

When Information System is developed a priority of subsystems development needs to be set. This problem is a more general problem than a well known problem Feedback Arc Set, and is like that problem also computationally hard to solve. Therefore in this ...

research-article
Design and Implementation of an Automatic Coffee Dryer

IA prototype drying system for coffee grains was developed using an oven with a feedback control system to accomplish this task. The coffee grains enter the system wet and are then subjected to a stable temperature of 45°C, thus achieving uniform ...

research-article
Prediction Model and Application Case of Rock Drillability based on Acoustic Velocity

In the deep formation of an oil field in the east of China, due to the great change of lithology and the poor drillability of rock, the mechanical drilling rate is low, the bit footage is reduced and the drill bit is seriously worn. The prolongation of ...

research-article
Methodology for Analysis of Gm-C Filters based on Statistical, Fuzzy Logic and Machine Learning Approach

In the paper a new approach for analysis of Gm-C filters is presented that is suitable for automation of some engineering tasks and integration in CAD tools. The proposed methodology includes data gathering through simulation and circuit mathematical ...

Recommendations