ABSTRACT
Robotic grinding and polishing of materials has its own specifics related to the requirements for constant pressing force maintaining, a movement trajectory and duration of processing. Constant contact force is needed to form a surface with desired roughness. Positioning with an industrial manipulator ensures precision accuracy of products achievement with lower processing time. Obtaining of the required characteristics is impossible without a high-quality calibration of pieces. The paper describes a precise pieces positioning method for grinding and polishing operations.
- W. (Wisama) Khalil and E. (Etienne) Dombre, Modeling, identification & control of robots. Kogan Page Science, 2004.Google Scholar
- K. L. Conrad, P. S. Shiakolas, S. Edu, and T. C. Yih, “ROBOTIC CALIBRATION ISSUES: ACCURACY, REPEATABILITY AND CALIBRATION,” 2000.Google Scholar
- M. R. Driels, W. Swayze, and S. Potter, “Full-pose calibration of a robot manipulator using a coordinate-measuring machine,” Int. J. Adv. Manuf. Technol., vol. 8, no. 1, pp. 34–41, Jan. 1993.Google ScholarCross Ref
- K. Lau, R. Hocken, and L. Haynes, “Robot performance measurements using automatic laser tracking techniques,” Robot. Comput. Integr. Manuf., vol. 2, no. 3–4, pp. 227–236, Jan. 1985.Google ScholarCross Ref
- “Robot hand-eye coordination based on stereo vision,” IEEE Control Syst., vol. 15, no. 1, pp. 30–39, Feb. 1995.Google ScholarCross Ref
- B. Mooring, Z. Roth, and M. Driels, “Fundamentals of manipulator calibration,” 1991.Google ScholarDigital Library
- M. Gaudreault, A. Joubair, I. B.- Sensors, and undefined 2018, “Self-calibration of an industrial robot using a novel affordable 3D measuring device,” mdpi.com.Google Scholar
- N. Krinitsyn, A. Babaev, E. S.-2018 18th International, and undefined 2018, “Robotized System For Processing Of Helical Surfaces,” ieeexplore.ieee.org.Google Scholar
- “KUKA System Software KUKA System Software 8.3 Operating and Programming Instructions for System Integrators,” 2015.Google Scholar
- Ali Marwan, Milan Simic, Fadi Imad Calibration method for articulated industrial robots // Procedia Computer Science, Volume 112, 2017, Pages 1601-1610.Google Scholar
- Lars Richter, Floris Ernst, Alexander Schlaefer, Achim Schweikard Robust real-time robot-world calibration for robotized transcranial magnetic stimulation // Int J Med Robotics Comput Assist Surg, 7 (2011), pp. 414-42.Google Scholar
- Bennett DJ, Hollerbach JM Autonomous calibration of single-loop closed kinematic chains formed by manipulators with passive end point constraints // IEEE TransRobotAutom, 7 (5) (1991), pp. 597-606.Google Scholar
- ZHUANG Han-qi, ROTH ZS, WANG KRobot calibration by mobile camera system [J] // Robotic Systems, 11 (3) (1994), pp. 155-168.Google Scholar
- LIU Yu, LIU Hong, NI Feng, XU Wen-fu New self-calibration approach to space robots based on hand-eye vision // Springer, J. Cent. South Univ. Technol, 18 (2011), pp. 1087-1096.Google ScholarCross Ref
- Veitschegger W, Wu C Robot accuracy analysis based on kinematics IEEE TransRobotAutom, 2 (3) (1986), pp. 171-179.Google Scholar
- Biqiang Du, Ning Xi, Erick Nieves Industrial Robot Calibration Using A Virtual Linear Constraint // International Journal On Smart Sensing And Intelligent Systems, 5 (4) (2012).Google Scholar
- Gatti G, Danieli G A practical approach to compensate for geometric errors in measuring arms: application to a six-degree-of-freedom kinematic structure // Me as SciTechnol, 19 (1) (2008).Google Scholar
- E.S. Gadelmawla, M.M. Kiura, T.M.A. Maksoud Roughness parameters // Journal of Materials Processing Technology, v. 123 (2002) p. 133-145.Google Scholar
Index Terms
- Spatial Positioning Accuracy Improving Robotic Grinding of Steel Pieces
Recommendations
Automated robotic grinding by low-powered manipulator
A new robotic grinding process has been developed for a low-powered robot system using a spring balancer as a suspension system. To manipulate a robot-arm in the vertical plane, a large actuator torque is required due to the tool weight and enormous ...
Robotic Compliant Grinding for Complex Blisk with an Intelligent End-Effector
2018 IEEE International Conference on Mechatronics and Automation (ICMA)This paper presents a novel robotic blisk grinding method in which a home-designed intelligent end-effector is implemented for active contact force control. The feed direction of the intelligent end-effector is arranged to be the same as the normal ...
Robotic compliant grinding of curved parts based on a designed active force-controlled end-effector with optimized series elastic component
Highlights- A new active compliant force-controlled end-effector based on series elastic actuator is designed for robotic grinding of curved surfaces.
- The influences of the elastic component and the grinding tool stiffnesses on the dynamic ...
AbstractHigh-accuracy, fast-response, and low-overshoot force control are important to guarantee the material removal accuracy and surface quality of robotic compliant grinding. In order to achieve the above target, this study develops an active ...
Comments