Dynamics of a Mono-cylindrical Crankshaft of a Four Strokes Otto Engine
Pages 50 - 54
Abstract
From thermodynamics data, the kinetics of the crankshaft of a mono-cylindrical mechanism is carried on; there is not a real full kinetic analysis of this kind of crankshaft. This work has the target of offering a first step analysis for any researcher that is interested in approaching the design optimization of a combustion engine. Though this kind of engine does not have spread use today, it is still a relevant point from which to depart. This work takes some carried on experiments on an internal combustion engine adapted to work as one cylinder. With the data provided, the energy generated by the explosion is assumed and then, it is possible to know the pressure generated in the combustion chamber. The cinematics is carried on the mechanism and then the forces per cycle are obtained. Giving the pressure along the time of the proposed crankshaft, the structural behavior of the crankshaft can be simulated during a complete Otto cycle.
References
[1]
P Moulin, J Chauvin, B Youssef, Modeling and control of the air system of a turbocharged gasoline engine, Control Engineering Practice, Volume 19, Issue 3, , Pages 287-297 March 2011.
[2]
J,Kunanoppadon, Thermal Efficiency of a Combined Turbocharger Set with Gasoline Engine, American J. of Engineering and Applied Sciences 3 (2): 342-349, 2010 ISSN 1941-7020.
[3]
A. Albrecht, G. Corde, V. Knop, H. Boie and M. Castagne, 1D Simulation of Turbocharged Gasoline Direct Injection Engine for Transient Strategy Optimization, SAE100 technical paper series, Modeling of SI and Diesel Engines 2005.
[4]
M. Díaz-Terrado, M., Motores Alternativos de Combustión Interna, Ed. Universidad Nacional de San Juan, pp 1-130, 2008.
[5]
J. Casanova-Kindelán, V, Aguirre-Montoya, Banco de pruebas para medida de fricción en pistones, Revista Iberoamericana de Ingeniería Mecánica, Vol. 9, N.º 3, pp. 79-94, 2005.
[6]
F S Silva, Fatigue on engine pistons – A compendium of case studies, Engineering Failure Analysis 13 (2006) 480–492.
[7]
M. Shariyat, J. Fathi Sola and S.A. Jazayeri, Experimentally validated combustion and piston fatigue life evaluation procedures for the bi-fuel engines, using an integral-type fatigue criterion, Latin American Journal of Solids and Structures,Vol. 13, Issue 6,2016
[8]
Gomes, J., Gaivota, N., Martins, R. F. y Pires-Silva, P., Failure analysis of crankshafts used in maritime V12 diesel engines, Engineering Failure Analysis, No. 92, pp. 466-479, 2018.
[9]
A. Pandiyan, G.Arun-Kumar, S Shaik-Asif, A. Patel, Parametric Optimization of Single-Cylinder Four-Stroke Spark Ignition Engine Crankshaft Using Four Different Materials—AISI 1040, AISI 4340, AISI 4140 and AISI 4615, Advances in Manufacturing Technology, Lecture Notes in Mechanical Engineering, pp 587-593, 2019.
[10]
J Mateus, V Anes, I Galvao, L Reis, Failure mode analysis of a 1.9 turbo diesel engine crankshaft, Engineering Failure Analysis, No. 101, pp. 394-406, 2019.
[11]
Pandiyan, A., Arun-Kumar, G., Shaik-Asif, S. y Patel, A., Parametric Optimization of Single-Cylinder Four-Stroke Spark Ignition Engine Crankshaft Using Four Different Materials—AISI 1040, AISI 4340, AISI 4140 and AISI 4615, Advances in Manufacturing Technology, Lecture Notes in Mechanical Engineering, pp 587-593, 2019.
[12]
Kosenok, B., B., Balyakin, V., B., Study of the dynamic characteristics of a two-cylinder internal combustion engine using vector models, Procedia Engineering, No. 106, pp183-191,2017.
[13]
Spence, T., W., Makhlouf, M., M., The effect of machining-induced residual stresses on the creep characteristics of aluminium alloys, Materials Science & Engineering A, No. 630, pp 125-130, 2015.
[14]
Ji, C., Shi, L., Wang, S., Cong, X., Su, T., Menghui, Y., Investigation on performance of a spark-ignition engine fuelled with dimethyl ether and gasoline mistures under idle and stoichiometric conditions, Energy, No. 126, pp 335-342, 2017.
Recommendations
Coupled quantum Otto heat engine and refrigerator with inner friction
We investigate two coupled spins 1/2 in a magnetic field as the working substance of the quantum Otto cycle. In the quantum adiabatic strokes, finite-time parametric transformations are employed either in the coupling strength or in the magnetic field. ...
Comments
Information & Contributors
Information
Published In
![cover image ACM Other conferences](/cms/asset/914ff160-9c9e-437e-89e4-6c8619dc6424/3459104.cover.jpg)
February 2021
644 pages
ISBN:9781450389839
DOI:10.1145/3459104
Copyright © 2021 ACM.
Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]
Publisher
Association for Computing Machinery
New York, NY, United States
Publication History
Published: 20 July 2021
Check for updates
Qualifiers
- Research-article
- Research
- Refereed limited
Conference
ISEEIE 2021
ISEEIE 2021: 2021 International Symposium on Electrical, Electronics and Information Engineering
February 19 - 21, 2021
Seoul, Republic of Korea
Contributors
Other Metrics
Bibliometrics & Citations
Bibliometrics
Article Metrics
- 0Total Citations
- 26Total Downloads
- Downloads (Last 12 months)6
- Downloads (Last 6 weeks)0
Reflects downloads up to 13 Feb 2025
Other Metrics
Citations
View Options
Login options
Check if you have access through your login credentials or your institution to get full access on this article.
Sign inFull Access
View options
View or Download as a PDF file.
PDFeReader
View online with eReader.
eReaderHTML Format
View this article in HTML Format.
HTML Format