ABSTRACT
Crackers are popular snack in Indonesia and are often used as a complement to various foods or as side dishes. One of crackers production processes is the drying process. The drying process is carried out mostly using conventional method, in an open area which is dependent on sunlight. This conventional drying have several problems about productivity, including fluctuating heat, posture and cleanliness, and requiring a fairly large drying area. Considering that there are two seasons in Indonesia, dry and rainy seasons, one of the obstacles in crackers production is the drying process during rainy season as the heat needed in the drying process will not be continuously available because of the rain. The development of technology demands an innovation to create crackers dryer invention instead of using conventional drying. The aim of this paper is build “Smart Fuse Water Dryer” tool has the potential to increase the productivity of crackers in SMEs, especially in SME Rahayu Kerupuk. Smart Fuse Water Dryer using microcontroller to increase productivity. This microcontroller is used as a controller in the drying process, which is to control the temperature and length of the drying process, electronically and automatically. This will make it easier to dry crackers without having to wait for sunny weather. From the existing drying process problems, we propose a tool that can provide faster drying process without relying on the heat of sunlight, more efficient in energy use, greater capacity, more ergonomic, more protections as users are not exposed to direct sunlight, and not easily causing fatigue. The creation of crackers dryer using heating elements and an automatic system equipped with a microcontroller as the brain of a tool "SMART FUSE WATER DRYER" is certainly very likely able to have a positive impact on SMEs that use this tool.
- Hignett and McAtamney, L., 2000, Rapid Entire Body Assessment (REBA), Applied Ergonomics, vol. 31, pp. 201-205Google ScholarCross Ref
- Ulum M, Setyaningrum, R and Talitha, T., 2020, Redesign Cassava cutting using Rasional methods to improve productivity, Jurnal Sistem Teknik Industri, Vol.22 (1) pp. 52-62, Talenta Publisher.Google ScholarCross Ref
- Setyaningrum, R., Jazuli, and Lestari, K.P., 2020, Builtd production tool of ‘Bandrek” to optimization of crystallization process and product residue, Jurnal SIMETRIS, Vol.11 (1) pp. 51-54.Google Scholar
- Setyaningrum, R., Subagyo and Wijaya, A,R., 2020, A Mathematical Model of Factors driving Product Success in An Indonesian Market using design Experiment, IjTech, 11(2), pp.322-332.Google ScholarCross Ref
- Ulrich & Eppinger. 1995. Product Design and Development. NY: McGraw-Hill.Google Scholar
- Adiyanto, O., Suratmo, B., Susanti, D.Y., 2017. Design cracker dryer using combination of solar sel and wood biomass. Industrial Engineering Department, Faculty of industrial Technology. Ahmad Dahlan University..Google Scholar
- Syarifudin , dkk. 2009. Oven Pengering Kerupuk Berbasis Mikrokontroler Atmega 8535 Menggunakan Pemanas Pada Industri Rumah Tangga. Jurusan Teknik Elektro, Institut Sains & Teknologi AKPRIND YogyakartaGoogle Scholar
- Schermerhorn, J. 1986. Productivity Perspectives in Management Development.Journal of Management Development Vol. 5, No. 2, pp 3-6.Google Scholar
Index Terms
- Design of an Ergonomic Crackers Dryer to Increase Production Productivity at Rahayu Krupuk SME
Recommendations
Heat Transfer Process Simulation and Analysis of Vacuum Freeze Dryer Vapor Captor
ICIC '11: Proceedings of the 2011 Fourth International Conference on Information and ComputingVacuum freeze dryer vapor captor was taken as the study object, and a mathematical model of freeze dryer vapor captor heat transfer process was established to simulate and analyze heat transfer process. In the condition of low temperature and low ...
Performance of solid-gas chemical heat pump subsystem of solar dryer
AMERICAN-MATH'10: Proceedings of the 2010 American conference on Applied mathematicsIn this paper the performance of solid-gas chemical heat pump subsystem of solar dryer has been investigated. A thermodynamic analysis is presented to upgrade solar energy with solid-gas chemical heat pump for agriculture drying purpose. A solar ...
Frosting Performance Dynamic Simulation and Analysis of Freeze Dryer Vapor Captor
ICIC '10: Proceedings of the 2010 Third International Conference on Information and Computing - Volume 04LG type vacuum freeze dryer vapor captor is taken as the study object, and a mathematical model of frost heat transfer of the vapor captor was established, the effective heat capacity method was used to simulate the heat transfer processes of vapor ...
Comments