skip to main content
10.1145/3489517.3530533acmconferencesArticle/Chapter ViewAbstractPublication PagesdacConference Proceedingsconference-collections
research-article

SEM-latch: a lost-cost and high-performance latch design for mitigating soft errors in nanoscale CMOS process

Published: 23 August 2022 Publication History

Abstract

Soft errors (primarily single-event transients (SET) and single-event upsets (SEU)) are receiving increased attention due to the increasing prevalence of automotive and biomedical electronics. In recent years, several latch designs have been developed for SEU/SET protection, but each has its own issues regarding timing, area, and power. Therefore, we propose a novel soft-error mitigating latch design, called SEM-Latch, which extends QUATRO and incorporates a speed path whereas embedding a reference voltage generator (RVG) for simultaneously improving timing, area, and power in 45nm CMOS process. SEM-Latch effectively reduces the power, area, and PDAP (product of delay, area, and power) by an average of 1.4%, 12.5%, and 8.7%, respectively, in comparison to a previous latch (HPST) with equivalent SEU protection. Furthermore, in comparison to AMSER-Latch, SEM-Latch reduces area, timing overhead and PDAP by 27.2%, 48.2%, and 60.2%, respectively, to provide 99.9999% particle rejection rate for SET protection.

References

[1]
T. Calin, M. Nicolaidis and R. Velazco, "Upset hardened memory design for submicron CMOS technology," in IEEE Transactions on Nuclear Science, vol. 43, no. 6, pp. 2874--2878, Dec. 1996
[2]
Yi Shao and S. Dey, "Separate dual-transistor registers: a circuit solution for online testing of transient error in UDMC-IC," 9th IEEE On-Line Testing Symposium, 2003. IOLTS 2003., 2003, pp. 7--11
[3]
Fazeli, Mahdi & Patooghy, Ahmad & Miremadi, Seyed Ghassem & Ejlali, Alireza. (2007). Feedback Redundancy: A Power Efficient SEU-Tolerant Latch Design for Deep Sub-Micron Technologies. Proceedings of the International Conference on Dependable Systems and Networks. 276--285.
[4]
S. Lin, Y. Kim and F. Lombardi, "Design and Performance Evaluation of Radiation Hardened Latches for Nanoscale CMOS," in IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 19, no. 7, pp. 1315--1319, July 2011
[5]
H. Nan and K. Choi, "High Performance, Low Cost, and Robust Soft Error Tolerant Latch Designs for Nanoscale CMOS Technology," in IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 59, no. 7, pp. 1445--1457, July 2012
[6]
Z. Huang, "A high performance SEU-tolerant latch for nanoscale CMOS technology," 2014 Design, Automation & Test in Europe Conference & Exhibition (DATE), 2014, pp. 1--5
[7]
Y. -. Li et al., "A Quatro-Based 65-nm Flip-Flop Circuit for Soft-Error Resilience," in IEEE Transactions on Nuclear Science, vol. 64, no. 6, pp. 1554--1561, June 2017
[8]
J. Tang et al., "AMSER-FF: Area-Minimized Soft-Error-Recoverable Flip-Flop for Radiation Hardening," 2021 IEEE International Test Conference at Asia (ITC-Asia), 2021.
[9]
S. Mitra, M. Zhang, N. Seifert, T. Mak and K. S. Kim, "Built-In Soft Error Resilience for Robust System Design," 2007 IEEE International Conference on Integrated Circuit Design and Technology, 2007, pp. 1--6
[10]
S. Kumar, S. Chellappa and L. T. Clark, "Temporal pulse-clocked multi-bit flip-flop mitigating SET and SEU," 2015 IEEE International Symposium on Circuits and Systems (ISCAS), 2015, pp. 814--817
[11]
D. Y. -. Lin and C. H. -. Wen, "DAD-FF: Hardening Designs by Delay-Adjustable D-Flip-Flop for Soft-Error-Rate Reduction," in IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 28, no. 4, pp. 1030--1042, April 2020
[12]
I. Nangate. (2008) Nangate freepdk45 generic open cell library. [Online]. Available: https://si2.org/open-cell-library/

Recommendations

Comments

Information & Contributors

Information

Published In

cover image ACM Conferences
DAC '22: Proceedings of the 59th ACM/IEEE Design Automation Conference
July 2022
1462 pages
ISBN:9781450391429
DOI:10.1145/3489517
Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]

Sponsors

Publisher

Association for Computing Machinery

New York, NY, United States

Publication History

Published: 23 August 2022

Permissions

Request permissions for this article.

Check for updates

Qualifiers

  • Research-article

Funding Sources

Conference

DAC '22
Sponsor:
DAC '22: 59th ACM/IEEE Design Automation Conference
July 10 - 14, 2022
California, San Francisco

Acceptance Rates

Overall Acceptance Rate 1,770 of 5,499 submissions, 32%

Upcoming Conference

DAC '25
62nd ACM/IEEE Design Automation Conference
June 22 - 26, 2025
San Francisco , CA , USA

Contributors

Other Metrics

Bibliometrics & Citations

Bibliometrics

Article Metrics

  • 0
    Total Citations
  • 153
    Total Downloads
  • Downloads (Last 12 months)34
  • Downloads (Last 6 weeks)10
Reflects downloads up to 05 Mar 2025

Other Metrics

Citations

View Options

Login options

View options

PDF

View or Download as a PDF file.

PDF

eReader

View online with eReader.

eReader

Figures

Tables

Media

Share

Share

Share this Publication link

Share on social media