Research on Ultrasonic High-resolution Imaging Technology for the Reinforced Concrete
Pages 212 - 218
References
[1]
H. Xu. Analysis of the current situation of concrete nondestructive testing technology and its development trend. Wireless Internet Technology, vol. 21, pp: 138-139, 2015.
[2]
F. Jiang, D. F. Zhou. Introduction to the application of ultrasonic nondestructive testing technology in pile foundation engineering. Heilongjiang Science, vol. 1, pp. 37, 2016.
[3]
H. S. Xie. Research on the degradation law and life prediction of RC well wall structure mechanical properties in deep and thick topsoil environment. China University of Mining and Technology, 2016.
[4]
Q. F. Li, Y. Wang, R. M. Liu, Ultrasonic Computed Tomography Imaging Method of Concrete Materials Based on Simulated Annealing Genetic Algorithm. Transactions of Nanjing University of Aeronautics and Astronautics, vol. 32, pp. 341-347, 2015.
[5]
P. Wang, Q. B. Han, X. P. Jiang, Effect of open cracks on concrete surface on near-surface acoustic waves, Acoustics Technology, vol. 36, pp. 247-251, 2017.
[6]
D. Zhang, J. Gui, Z. H. Zhou. Overview of ultrasonic phased-array total focus nondestructive testing technology, Acoustics Technology, vol. 37, pp. 320-325, 2018.
[7]
Y. Y. Guo. Research on detection of internal defects in concrete by ultrasonic method, Concrete, vol. 07, pp. 154-156+160, 2017.
[8]
J. F. Chaix, V. Garnier, G. Corneloup. Ultrasonic wave propagation in heterogeneous solid media: Theoretical analysis and experimental validation. ULTRASONICS, vol. 44, pp. 200-210, 2006.
[9]
G. Wang, L. X. Huang, Z. G. Wang, A method to improve the imaging quality of frequency domain synthetic aperture ultrasound arrays. Journal of Sensing Technology, vol. 33, pp. 1285-1291, 2020.
[10]
J. J. Chang, H. Y. Zhong, X. F. Zeng, Synthetic aperture focusing imaging of concrete, Concrete, vol. 07, pp. 42-46+54, 2020.
[11]
M. Weston, C. Nageswaran. Calibration of ultrasonic techniques using full matrix capture data for industrial inspecton. Insight-Non-Destructive Testing and Conditong Monitoring, vol. 54, pp. 602-611, 2012.
[12]
Y. Chen, Z. B. Luo. Modeling of ultrasonic propagation in heavy-walled centrifugally cast austenitic stainless steel based on EBSD analysis. Ultrasonics, vol. 59, pp. 31-39, 2015.
[13]
M. Fink, C. Prada, F. Wu, Self focusing in inhomogeneous media with time reversal acoustic mirrors. Ultrasonics Symposium, IEEE, vol. 2, pp. 681-686, 1989.
[14]
W. Wei, C. H. Wang. Self-focusing performance of time-reversal method in the presence of flat interfaces. Applied Acoustics, vol. 18, pp.1-5, 1999.
[15]
C. H. Wang, W. Wei. Improved time-reversal method for the identification of bounded-time ultrasonic target detection. Journal of Acoustics, vol. 3, pp. 193-197, 2002.
[16]
B. S. Sun. Application and development of synthetic aperture imaging. Applied Acoustics, vol. 37, pp. 787-793, 2018.
[17]
Li Q. F, Shi L. H, Liang D. K. Research on 2D imaging technique for concrete cross section. Chinese Journal of Acoustics, vol. 29, no. 01, 85-96, 2010.
[18]
Q. F. Li, L. H. Shi, D. k. Liang. Research on two-dimensional imaging method for concrete sections based on synthetic aperture focusing technique. Journal of Acoustics, vol. 33, pp. 370-377, 2008.
[19]
Z. G. Zhou, D. Peng. Full-focus imaging algorithm and its calibration study in phased-array ultrasonic inspection technology. Journal of Mechanical Engineering, vol. 51, pp. 1-7, 2015.
[20]
Lawrence C. Wide band time-reversal imaging of an elastic target in an acoustic wave guide. Journal of The Acoustical Society of America, vol. 115, pp. 259-268, 2004.
[21]
J. G. Ma, Z. W. Shan, J. W. Yin, Research on passive localization technique of multiple array time-reversal mirror. Applied Acoustics, vol. 26, pp. 282-286, 2007.
[22]
H. Fu, B. Wu, C. F. He. A new method for ultrasonic guided wave inspection of pipelines based on virtual time-reversal focusing. Journal of Mechanical Engineering, vol. 49, pp. 17-23, 2013.
- Research on Ultrasonic High-resolution Imaging Technology for the Reinforced Concrete
Recommendations
Prediction of deflection of reinforced concrete shear walls
Reinforced concrete shear walls are used in tall buildings for efficiently resisting lateral loads. Due to the low tensile strength of concrete, reinforced concrete shear walls tend to behave in a nonlinear manner with a significant reduction in ...
Mechanical properties of fibre-reinforced high strength concrete
ICCST '02: Proceedings of the sixth conference on Computational structures technologyThe increased use of high strength concrete in structural applications dictates the need to enhance its brittle behaviour under compressive and tensile loads. An experimental programme has been conducted to investigate the effects of introducing ...
Flexural Behavior of Reinforced Concrete Beams Superposing with Partial Steel Fiber Reinforced Full-lightweight Concrete
ICETCE '12: Proceedings of the 2012 Second International Conference on Electric Technology and Civil EngineeringTo improve the flexural properties and lighten the weight of ordinary reinforced concrete beam (RCB), a new type of superposed RCB is developed with partially steel fiber reinforced full-lightweight concrete (SFRFLC) in tensile zone. 10 beams with ...
Comments
Information & Contributors
Information
Published In
October 2021
3136 pages
ISBN:9781450385046
DOI:10.1145/3495018
Copyright © 2021 ACM.
Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]
Publisher
Association for Computing Machinery
New York, NY, United States
Publication History
Published: 14 March 2022
Check for updates
Qualifiers
- Research-article
- Research
- Refereed limited
Conference
AIAM2021
AIAM2021: 2021 3rd International Conference on Artificial Intelligence and Advanced Manufacture
October 23 - 25, 2021
Manchester, United Kingdom
Acceptance Rates
Overall Acceptance Rate 100 of 285 submissions, 35%
Contributors
Other Metrics
Bibliometrics & Citations
Bibliometrics
Article Metrics
- 0Total Citations
- 32Total Downloads
- Downloads (Last 12 months)8
- Downloads (Last 6 weeks)0
Reflects downloads up to 01 Mar 2025
Other Metrics
Citations
View Options
Login options
Check if you have access through your login credentials or your institution to get full access on this article.
Sign inFull Access
View options
View or Download as a PDF file.
PDFeReader
View online with eReader.
eReaderHTML Format
View this article in HTML Format.
HTML Format