A Correction Method for Attitude Measurement in Steerable Drilling System
Authors: 
Nan Zhang, Chao Guo, Fei LiAuthors Info & Claims
Nan Zhang, Chao Guo, Fei LiAuthors Info & ClaimsAISS '21: Proceedings of the 3rd International Conference on Advanced Information Science and System
Article No.: 86, Pages 1 - 5
Abstract
ABSTRACT—In the attitude measurement of the steering drilling system, the axes of the sensor cannot be perfectly orthogonal, and the instrument coordinate system does not coincide with the geographic coordinate system initially, which leads to installation errors. At the same time, the measurement offsets and the inaccurate scale factor have a great impact on the accuracy of attitude angle calculation. To eliminate the above influence and improve the drilling accuracy, this method is based on the three-axis accelerometer and fluxgate to constitute the measurement system and establish the attitude correction model. This method includes measurement offsets and scale factor calculation, installation error correction matrix algorithm, and temperature compensation calculation. Experimental results show that the proposed method can effectively improve the attitude angle calculation accuracy by more than 2.6 ∼ 5.6 times, the error between inclination angle and tool face angle is less than 0.06°. The method effectively improves the attitude measurement accuracy of steering drilling tools and improves drilling efficiency.
CCS CONCEPTS • Hardware • Power and energy • Energy generation and storage • Fuel-based energy
References
[1]
W. B. Cheng, Y. Y. Gan, X. R. Cheng, L. P Jiang, and F. Liu. 2018. Single quadrant correction of installation error for vertical steering drilling tool. Chinese Journal of Scientific Instrument, vol. 39, pp. 41-47, 2018-06-15 2018.
[2]
T. Xu, W. S. Luo, L.B. Du, H. Lv. 2007 Research of measurement while drilling and azimuth correction for horizontal directional drilling. Chinese Journal of Scientific Instrument, pp. 236-240, 2007-02-28 2007.
[3]
H. G. Wang, Y. H Ge, and S. Lin. 2017 Technologies in deep and ultra-deep well drilling: Present status, challenges and future trend in the 13th Five-Year Plan period (2016-2020). Natural Gas Industry, vol. 37, pp. 1-8, 2017-04-21 2017.
[4]
P. Shao, B. Y. Liu, Y. N. Su, and L Zhang. 2012 Theoretical and experimental study on the precise calibration of the inclinometer in vertical drilling tools. ACTA PETROLEI SINICA, vol. 33, pp. 692-696, 2012-07-15 2012.
[5]
W. B. Cheng, L. P. Jiang, F. Liu, Y. Y. Gan, and N. Wei. 2018. Vertical Attitude Measurement Based on Four Euler Rotations. in 2018 IEEE CSAA Guidance, Navigation, and Control Conference (GNCC).
[6]
Q. L. Xue, Q. S. Ding, and L. L Huang. 2013. The latest progress and development trend of rotary steering drilling technology. China Petroleum Machinery, pp. 1-6 2013.
[7]
J. Guo, M. Y. Zhong. 2013. Calibration and Compensation of the Scale Factor Errors in DTG POS. IEEE Transactions on Instrumentation and Measurement, vol. 62, pp. 2784-2794, 2013.
[8]
J. F. Vasconcelos, G. Elkaim, C. Silvestre, P. Oliveira, and B. Caldeira. 2008. Geometric Approach to Strapdown Magnetometer Calibration in Sensor Frame. IFAC Proceedings Volumes, vol. 41, pp. 172-177, 2008.
[9]
F. Sun. and Q. L. Xue, 2013. The calibration algorithm for installation error of the strap-down measurement-while-drilling system. Electronic journal of geotechnical engineering, vol. 18, pp. 3217-3228, 2013.
[10]
J. Sugiura, A. Bowler. 2014. Improved Continuous Azimuth and Inclination Measurement by Use of a Rotary-Steerable System Enhance Downhole-Steering Automation and Kickoff Capabilities Near Vertical, Spe Drilling & Completion, vol. 29, pp. 226-235, 2014.
[11]
G. L. Zhang, Y. H. Jiang and S. Li. 2016. The IMU calibration mathematical modeling and error analysis. Chinese Journal of Sensors and Actuators, vol. 29, pp. 886-891, 2016-06-27 2016.
[12]
Y. P. Ma, G Wei and Q. D. Zhou. 2016. Study on the steering differential calibration method for magnetic gradiometer base on tri-axis fluxgate. Transducer and Micro-system Technologies, vol. 35, pp. 9-13, 2016-08-30 2016.
[13]
H. Peng, Z. Xiong, R. Wang, and E. Al. 2014. Dynamic Parameter Identification Research on the Installation Errors and the Scale Factor Errors of the IMU. Chinese Space Science and Technology, vol. 000, pp. 42-49, 2014.
Index Terms
- A Correction Method for Attitude Measurement in Steerable Drilling System
Index terms have been assigned to the content through auto-classification.
Recommendations
A Digital Close-Range Photogrammetry System for Attitude Measurement of Aircraft Model in Wind Tunnel: A Preliminary Discussion
ICICTA '10: Proceedings of the 2010 International Conference on Intelligent Computation Technology and Automation - Volume 01This paper investigates a digital photogrammetry system for attitude measurement of an aircraft model in wind tunnel. Many retroreflective targets are firstly printed on the surface of the aircraft model. Then a binocular digital photogrammetry system ...
Research on Instrumental Error Compensation of Strap-down Inertial Navigation System
CAR '09: Proceedings of the 2009 International Asia Conference on Informatics in Control, Automation and RoboticsError of inertial instruments is a very important factor which influences the accuracy of SINS. The error models of the inertial instruments are established, and then error compensation algorithms are deduced which can simultaneously compensate the ...
The research on attitude correction method of robot monocular vision positioning system
2016 IEEE International Conference on Robotics and Biomimetics (ROBIO)In order to improve the measurement accuracy of monocular vision positioning system, a fast calibration method based on distance laser sensor(DLS) for robot positioning system is proposed. Based on this method, the attitude correction model of positioning ...
Comments
Information & Contributors
Information
Published In
November 2021
526 pages
ISBN:9781450385862
DOI:10.1145/3503047
Copyright © 2021 ACM.
Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]
Publisher
Association for Computing Machinery
New York, NY, United States
Publication History
Published: 19 January 2022
Check for updates
Author Tags
Qualifiers
- Research-article
- Research
- Refereed limited
Funding Sources
- National Science Foundation of China
Conference
AISS 2021
AISS 2021: 2021 3rd International Conference on Advanced Information Science and System
November 26 - 28, 2021
Sanya, China
Acceptance Rates
Overall Acceptance Rate 41 of 95 submissions, 43%
Contributors
Other Metrics
Bibliometrics & Citations
Bibliometrics
Article Metrics
- 0Total Citations
- 17Total Downloads
- Downloads (Last 12 months)2
- Downloads (Last 6 weeks)0
Reflects downloads up to 05 Mar 2025
Other Metrics
Citations
View Options
Login options
Check if you have access through your login credentials or your institution to get full access on this article.
Sign inFull Access
View options
View or Download as a PDF file.
PDFeReader
View online with eReader.
eReaderHTML Format
View this article in HTML Format.
HTML Format