Design and load test method of 2×250kN large-span hoist
Pages 286 - 290
Abstract
The mobile hoist is an important equipment of hydropower station, consisting of gate frame, trolley track, trolley, hydraulic automatic gripping beam, trolley track, trolley walking mechanism, trolley power supply device, trolley power supply device, ladder platform railing, driver's room, wind measurement device, trolley grounding device and electrical equipment, etc. It has a vital role for the normal drainage and flood control of steel gates, regulation of people's living water, irrigation of farmland, transportation of water conservancy and Hydroelectricity generation has a vital role. In this paper, for the requirements of Baihetan hydropower station inlet, 2×250kN large span gate machine is designed and its load test method is studied.
References
[1]
Bu Xinguang. Reliability analysis of metal structure of hydraulic gate hoist [D]. River and Sea University, 2006.
[2]
Guo Qing. Safety evaluation of hydraulic gates and openers in service [D]. Wuhan University, 2005.
[3]
Weng Zhenyue. Application of PLC and rotary encoder in tower crane position control[J]. Electrical and Mechanical Engineering Technology,2013,42(06):157-159.
[4]
Li Tao. Research on the positioning control system of overhead crane [D]. Tianjin:Tianjin University of Technology,2011.
[5]
Liu Shuyan, Zhao Sumei, Liu Hui. Automatic positioning technology of multifunctional electrolytic copper insulated crane BPS[J]. Lifting and transportation machinery,2014(02):62-64.
[6]
Liu Pu. Research on the control system of port gantry crane based on PLC and frequency converter[D]. Nanjing:Nanjing University of Technology,2014.
[7]
Yang Yanguang, Meng Lei. About radio frequency identification technology [J]. Information and Computer(Theory Edition),2014(03):221.
[8]
Li F, Wu H, Li F. Intelligent control system for catchment wells of hydropower plants based on soft starters [J]. Northwest Hydropower,2005(03):13-15.
[9]
Sotnykov O., Rodionov M., Maruschak P., et. Failure analysis of the hingelever mold oscillator bearings of the continuous casting machine, Strength, Fracture and Complexity, 2014, Vol. 8, No. 3, 135-143.
- Design and load test method of 2×250kN large-span hoist
Recommendations
Comprehensive Influence of Salinity and Organic Load on Anaerobic Sequencing Batch Biofilm Reactor (ASBBR) Treating Mustard Tuber Wastewater
ISDEA '13: Proceedings of the 2013 Third International Conference on Intelligent System Design and Engineering ApplicationsAccording to the characteristics of high concentration of organic matters and high biodegradability, a new and efficient anaerobic sequencing batch biofilm reactor (ASBBR) was chosen as an anaerobic pretreatment unit to treat mustard tuber wastewater. ...
Computer monitoring of load test on piles
ICAAISE '01: Proceedings of the eighth international conference on The application of artificial intelligence to civil and structural engineering computingIn soft soil foundation must be strengthened with piles. Problem is always local, so measurement must be done on working location. Building company can only guess the quality of piles support. Laboratory for electrical measurement on Faculty for ...
Desulfurization Performance Study on Many Kinds of Load-Modification Fly Ash
ICIM '09: Proceedings of the 2009 International Conference on Innovation Management (icim 2009)Sulfur dioxide is a kind of toxic and harmful gas, and will pollute atmosphere environment if exhausted directly. There are a lot of desulfurization methods so far. The desulfurization efficiency including many kinds of fly ash containing bag dust ...
Comments
Information & Contributors
Information
Published In
December 2021
290 pages
ISBN:9781450385169
DOI:10.1145/3508297
Copyright © 2021 ACM.
Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]
Publisher
Association for Computing Machinery
New York, NY, United States
Publication History
Published: 21 April 2022
Check for updates
Author Tags
Qualifiers
- Research-article
- Research
- Refereed limited
Conference
EEET 2021
EEET 2021: 2021 4th International Conference on Electronics and Electrical Engineering Technology
December 3 - 5, 2021
Nanjing, China
Contributors
Other Metrics
Bibliometrics & Citations
Bibliometrics
Article Metrics
- 0Total Citations
- 27Total Downloads
- Downloads (Last 12 months)4
- Downloads (Last 6 weeks)0
Reflects downloads up to 08 Mar 2025
Other Metrics
Citations
View Options
Login options
Check if you have access through your login credentials or your institution to get full access on this article.
Sign inFull Access
View options
View or Download as a PDF file.
PDFeReader
View online with eReader.
eReaderHTML Format
View this article in HTML Format.
HTML Format