Application of a deformation measurement technology based on multi IMU
Author: 
Nan ZhangAuthors Info & Claims
Nan ZhangAuthors Info & ClaimsPages 381 - 385
Abstract
The establishment of a unified attitude datum of a ship requires high-precision measurement of the deformation of the ship deck. The deformation of the ship deck is measured in real time with high precision by using the cooperative work of multi Imu, and the relative space datum of different battle positions relative to the ship central inertial navigation is established, which can complete the unified attitude datum of different battle positions of the ship. Based on the theory of multi IMU deformation measurement, this paper uses three-axis turntable to solve the technical problem of ship deck deformation measurement.
References
[1]
Z. Y. Zhao, W. S. Ting, M. L.Juan, G. Y. Sheng. Review of measuring technique for ship deformation[J]. Ship Engineering, 2007, 29(6): 58-61.
[2]
W. S. Ting, W. Z. Qing, Z. Y. Zhao, Monitoring on ship hull deformation and correction for heading& attitude information[J]. Journal of Chinese Inertial Technology, 2007, 15(6): 635-641.
[3]
B. I. Vaisgant, A. V. Tupisev,G. V. Tyumeneva . Sensitivity of the Kalman filter in a task of definition of deformation of the ships deformation[J]. Gyroscope and Navigation, 1993(2): 22-29.
[4]
J. G. Wen. Study on pose relay videometrics method with camera-series and ship deformations measurement[D]. Changsha: National University of Defense Technology, 2010.
[5]
W. D. Jun, L. Y. Fen. Summary on removing influence of ship deformation and providing accurate attitude references for warship[J]. Journal of Chinese Inertial Technology, 2005, 13(4): 77-82.
[6]
W. Wei, C. Sheng, Q. S. Qiao. Online estimation of ship dynamic flexure model parameters for transfer alignment[J]. IEEE Transactions on Control Systems Technology, 2013, 21(5): 1666-1678.
[7]
D. H. De, L. A. Li, L. J. Hua. Deformation analysis and IMU-based real-time measuring method for big ship sailing in wave[J]. Journal of Chinese Inertial Technology, 2014, 22(3): 327-332.
[8]
Y. Y. Tao, W. X. Shu, W. Wei, Optimal estimation of ship angular deformation for autonomous measurement by LGU[J]. Journal of Chinese Inertial Technology, 2014, 22(3): 284-287.
[9]
Z. J. Xing, D. D. Kai, W. Wei, Z. J. Peng. Ship angular flexure measurement method based on ring laser gyro units[J]. Opto-Electronic Engineering, 2019, 46(1): 180556.
[10]
Z. J. Xing, Q. S. Qiao, W. X. Shu, H. Z. Sheng. Attitude matching method for ship deformation measurement[J]. Journal of Chinese Inertial Technology, 2010, 18(2): 175-180.
Recommendations
A real-time on-chip algorithm for IMU-Based gait measurement
PCM'12: Proceedings of the 13th Pacific-Rim conference on Advances in Multimedia Information ProcessingThis paper presents a real-time and on-chip gait measurement algorithm used in our Gait Measurement System (GMS). Our GMS is a small foot-mounted device based on an Inertial Measurement Unit (IMU), which contains an accelerometer and a gyroscope. The ...
IMU-Based Human Ground Reaction Force Estimation Method
Intelligent Robotics and ApplicationsAbstractPlantar pressure data contain rich information on human gait and posture. To achieve convenient and accurate measurement of ground reaction force (GRF) during walking, this article proposes a method for measuring human GRF based on wearable ...
IMU-Kinect: a motion sensor-based gait monitoring system for intelligent healthcare
UbiComp/ISWC '19 Adjunct: Adjunct Proceedings of the 2019 ACM International Joint Conference on Pervasive and Ubiquitous Computing and Proceedings of the 2019 ACM International Symposium on Wearable ComputersGait rehabilitation is a common method of postoperative recovery after the user sustains an injury or disability. However, traditional gait rehabilitations are usually performed under the supervision of rehabilitation specialists, meaning the patients ...
Comments
Information & Contributors
Information
Published In
June 2022
905 pages
ISBN:9781450397179
DOI:10.1145/3548608
Copyright © 2022 ACM.
Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]
Publisher
Association for Computing Machinery
New York, NY, United States
Publication History
Published: 14 October 2022
Check for updates
Qualifiers
- Research-article
- Research
- Refereed limited
Conference
ICCIR 2022
ICCIR 2022: 2022 2nd International Conference on Control and Intelligent Robot
June 24 - 26, 2022
Nanjing, China
Acceptance Rates
Overall Acceptance Rate 131 of 239 submissions, 55%
Contributors
Other Metrics
Bibliometrics & Citations
Bibliometrics
Article Metrics
- 0Total Citations
- 25Total Downloads
- Downloads (Last 12 months)2
- Downloads (Last 6 weeks)2
Reflects downloads up to 05 Mar 2025
Other Metrics
Citations
View Options
Login options
Check if you have access through your login credentials or your institution to get full access on this article.
Sign inFull Access
View options
View or Download as a PDF file.
PDFeReader
View online with eReader.
eReaderHTML Format
View this article in HTML Format.
HTML Format