ABSTRACT
Aiming at the problem of ground-penetrating radar measuring the accuracy and dielectric constant of underground targets, this paper combines the interface Snell's law and the co-centering method, uses the time-domain distance curve fitting to obtain the echo time, and uses the distance between the transmitter and receiver antennas as a variable to find the relative dielectric constant. The non-destructive detection of the dielectric constant is realized. The feasibility and stability of the model are verified using the GPRMAX simulation software. When the target is at 0.5 m below ground and the dielectric constant of the underground medium is in the range of 4-8, the error of the relative dielectric constant calculated by the model averages at 5.41%, and the error of the calculated target depth averages at 2.96%. This method is suitable for detecting the dielectric constant of any target and medium in the subsurface.
- Gaballah M, Alharbi T. 3-D GPR visualization technique integrated with electric resistivity tomography for characterizing near-surface fractures and cavities in limestone [J]. Journal of Taibah University for Science, 2022, 16(1): 224-239.Google ScholarCross Ref
- Yan Kun, ZHANG Zhihua, WEN Yanan. Research on texture feature extraction method of ground-penetrating radar image of pavement base [J]. Progress in Geophysics, 2021, 36(5): 2234-2243. (in Chinese)Google Scholar
- LENG Z, AL ‐QADI I L. An innovative method for measuring pavement dielectric constant using the extended CMP method with two air ‐ coupled GPR Systems [J]. NDT & E international, 2014, 66(3): 90‐98.Google Scholar
- Li Yina, XU Guoqi, Wang Lihai, Influence of dielectric constant of living wood for ground penetrating radar application on main application conditions [J]. Journal of Central South University of Forestry and Technology, 2022, 42 (4): 152‐161. (in Chinese)Google Scholar
- Trevor Steiner, Kyle Hoegh, Eyoab Zegeye Teshale, Method for assessment of modeling quality for asphalt dielectric constant to density calibration[J]. Journal of Transportation Engineering, Part B: Pavements, 2020, 146(3):Google Scholar
- Hoegh, K., R. Roberts, S. Dai, and E. Zegeye Teshale. Toward corefree pavement compaction evaluation: An innovative method relating asphalt permittivity to density. Geosciences. 2019. 9 (7): 280.Google Scholar
- ZHAO S, AL ‐QADI I L. Development of an analytic approach utilizing the extended common midpoint method to estimate asphalt pavement thickness with 3D ground penetrating radar [J]. NDT & E international, 2016, 78: 29‐36.Google Scholar
- Leng Z, Al-Qadi. IL. An innovative method for measuring pavement dielectric constant using the extended CMP method with two air-coupled GPR systems. NDT E Int 2014; 66:90–8.Google Scholar
- Deng Xiaoyan, Wang Tong. Determination of relative dielectric constant of medium in ground penetrating radar detection [J]. Geophysical and Geochemical Exploration, 2009, 33(01):43-45+48. (in Chinese)Google Scholar
- Li X P. Application of ground penetrating radar techniques on test of highway hazard[J]. Shanghai Geology, 2008, 29(2):54-56. (in Chinese)Google Scholar
- TORBAGHAN M E, LI W, METJE N, Automated detection of cracks in roads using ground penetrating radar[J]. Journal of applied geophysics, 2020, 179(1): 104118.Google Scholar
Index Terms
- Measurement of dielectric constant based on time-domain ground-penetrating radar curve imaging algorithm
Recommendations
Dielectric Constant Measurement of Low Loss Materials Using NB BPF with Modified Slow Wave Resonator
Compact wide-stopband narrow bandpass filter using modified slow wave resonators is proposed. The basic filter consists of an open-stub, transmission line and coupled line. Using transmission line theory and coupled line structure, the new design ...
Characterisation of a ground penetrating radar antenna in lossless homogeneous and lossy heterogeneous environments
Directly measuring the radiation characteristics of Ground Penetrating Radar (GPR) antennas in environments typically encountered in GPR surveys, presents many practical difficulties. However it is very important to understand how energy is being ...
Measurement of Dielectric Constant of Some Materials Using Planar Technology
ICCEE '09: Proceedings of the 2009 Second International Conference on Computer and Electrical Engineering - Volume 02For proper design of microwave components, such as filters, oscillators, mixers, and other microwave devices, the dielectric constant of the substrate must be known. Therefore, the main aim of this paper is to measure the dielectric constant of some ...
Comments